Focus LED Round Honeycomb Light Filter 53mm - Black

The Focus LED honeycomb filter is a 53mm diameter aluminium accessory that fits over the front of compatible track lights and spotlights to reduce glare and tighten beam control. The honeycomb grid structure breaks up direct line-of-sight to the LED source, lowering brightness peaks and creating more comfortable task lighting without reducing overall output significantly.

Designed for office environments, retail spaces, galleries and anywhere anti-glare lighting matters, the filter clips or screws onto the front bezel of Maytoni Focus LED track heads and similar 53mm-aperture spotlights. The black aluminium construction absorbs stray reflections and sits flush with the fixture face, maintaining a clean profile. At 3mm thickness the filter adds minimal projection to the fitting.

The honeycomb cells are angled to permit light travelling straight ahead while blocking light at steep angles, narrowing the effective beam spread by approximately 10-15 degrees depending on the base optic. This makes the filter useful for reducing spill light onto walls or ceilings when fixtures are mounted close to vertical surfaces, or for preventing glare when a spotlight is positioned where viewers might look directly at it. The black finish pairs with black-bodied track systems and recessed downlights without visual contrast.

Product Manual

What fixtures does this fit?

The 53mm diameter is designed for Maytoni Focus LED track lights and similar-aperture spotlights. Measure the front bezel diameter of your fixture before ordering to confirm compatibility.

Does it reduce light output?

The honeycomb structure blocks some light travelling at steep angles, but the effect on overall lumen output is modest — typically under 10%. The primary function is glare reduction and beam tightening rather than dimming.

How is it fitted?

Fitting method varies by fixture model. Some Maytoni Focus LED heads accept the filter via a magnetic or clip-on bezel ring; others require it to be screwed onto the front. Refer to the product manual linked above for the specific method for your fitting.

Can it be used outdoors?

The aluminium construction tolerates damp conditions, but IP rating depends on the host fixture. If your spotlight is rated for outdoor use, the filter will not degrade that rating. Do not use on fixtures where the filter blocks ventilation required for heat dissipation.