Description
This is an unlit corner connector for the Flux range's suspended linear lights: a black, L-shaped section that joins two lengths at a right angle, so a run of light can turn a corner instead of stopping short. It measures 138mm long, 138mm wide and 94.2mm high, and weighs 0.3KG. What you receive is the corner piece itself; the linear lights it joins are sold separately and are not in the box. It carries no light of its own and needs no power supply. Rated IP20, it belongs indoors, in dry rooms only.
We would reach for it wherever a suspended line of light should follow the shape of the space beneath it: around two sides of a long dining table, along an L-shaped desk run in a study or office, or across the corner of a reception area. Instead of two separate bars ending side by side, you get one continuous L-shaped line overhead, with the corner reading as a clean black joint while the lit lengths carry on either side. It suits anyone planning a layout that turns, rather than a single straight run.
Silver joining inserts extend from each end of the black body, finished with red connectors, so the corner is ready to meet a linear light on both arms. The maker lists it as an optional accessory, one kit for each corner connection, so count the turns in your layout and order one per corner; a rectangle of four lengths, for example, needs four. Because it has no light source, there is nothing to dim or replace. The full run is installed by a qualified electrician.
Specification
| Length |
138mm |
| Width |
138mm |
| Height |
94.2mm |
| Light |
None: an unlit corner (CIECO, blind) |
| Fits |
The range's suspended linear lights |
| Finish |
Black |
| IP Rating |
IP20 |
| Class |
Class III |
| Certification |
CE |
| Weight |
0.3KG |
| Warranty |
5 Years |
Frequently Asked
Does the Flux corner connector give off any light?
No. It is an unlit corner section with no light source of its own, and it needs no power supply. The light comes from the linear lengths it joins.
Are the linear lights included with the corner connector?
No. You receive the corner piece only. The Flux suspended linear lights it joins are sold separately and are not in the box.
How many corner connectors does my layout need?
The maker specifies one kit for each corner connection, so you need one corner connector for every right-angled turn in your run of linear lights.
What size is the corner connector?
It measures 138mm long, 138mm wide and 94.2mm high, and it weighs 0.3KG, so it adds very little to the suspended run it joins.
Which rooms is the corner connector rated for?
It is rated IP20, which means it belongs indoors in dry rooms only, such as a dining room, a study, an office or a reception area.
What finish is the corner connector?
The body is black, with silver joining inserts and red connectors at each end where it meets the linear lights on either side.