Description
Our Flowing Contour Lines 3D wall panels bring slow, rolling movement to a plain wall. Smooth bands run across the full width of each panel, every one divided from the next by a stepped edge. In the top half they rise gently towards the right, lower down they undulate softly, and across the middle they fold back on themselves in nested U-shaped bends that open towards the right edge, like contour lines or wood grain curving round a knot. The result is one large, irregular sweep rather than a small repeat. Each white PVC panel is a 50cm square with a relief 10mm deep, enough to give every band a crisp edge without the wall feeling busy.
These panels are for interior walls in homes, offices, hotels and shops. They make a natural feature wall behind a bed, a sofa or a reception desk. Light is what brings the pattern to life. When it falls across the wall from one side, from a window or a wall washer, each stepped edge picks up a fine line of shadow and the bends deepen into soft hollows. In flatter light the wall settles to a calm white with a gentle ripple, so it suits rooms that need texture without strong contrast.
Fitting needs no special equipment. Spread adhesive over the back of a panel and press it onto the wall, cutting panels to fit at the edges, then fill the joins with filler and wipe them clean. Adhesive and filler are sold separately. Four panels cover one square metre, which makes it simple to work out how many your wall needs. PVC is waterproof and low maintenance, and a damp cloth keeps the surface clean. For styling, let the panels be the one textured surface in the room: keep the furniture in front simple, with plain fabrics and natural wood, so the contours stay the focus.
Specification
| Pattern |
Flowing Contour Lines |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
10mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Flowing Contour Lines pattern look like?
Smooth bands with stepped edges run across the panel, rising gently in the top half and rippling lower down. Across the middle they fold into nested U-shaped bends, much like contour lines or wood grain, so each panel reads as one large sweep.
How big is each panel and how much wall does it cover?
Each panel is 50 x 50cm, and four of them cover one square metre. Measure your wall in square metres to plan how many you need.
How do you fix these 3D wall panels to the wall?
You spread adhesive over the back of each panel and press it firmly onto the wall. Panels can be cut to fit at the edges, and the joins are filled with filler and wiped clean. No special equipment is needed.
Do I need to buy anything else to put them up?
Yes. Neither the adhesive for fixing the panels nor the filler for the joins comes with them, so you will need to buy both before you start.
Where can I use these wall panels?
They are for interior walls in homes, offices, hotels and shops, and they work especially well on a feature wall where light falls across them from one side.
How do I keep the panels clean?
Wipe them over with a damp cloth whenever they need it. The panels are PVC, which is waterproof, so they are low maintenance.