Description
Our Floral Scroll Diamond 3D wall panels bring a classic, ornamental pattern to a plain wall. A large diamond, outlined by two parallel raised lines, fills each panel, its points reaching almost to the middle of every edge. Inside it sits a single scroll: curving stems form a ring, with sprays of teardrop-tipped leaves curling outward and a few turning inward. Outside the diamond, each corner holds a smaller fan of layered scalloped arcs around a small ring, turned to face its corner. The scroll and lines are rounded and clearly raised from a flat ground, in a relief 12mm deep, and each white PVC panel is a 50cm square.
The panels are made for interior walls in homes, offices, hotels and shops, and they suit rooms with a traditional feel. A feature wall behind a bed, along a hallway or behind a reception desk shows the design at its best. When light falls across the wall from one side, the relief throws soft shadows, so the pattern reads more strongly under a wall light than in flat daylight. Laid edge to edge, the corner fans of four neighbouring panels gather where they meet, building a second motif across the wall. Four panels cover one square metre, which makes working out how many a wall needs straightforward.
Each panel is made from a 0.8mm sheet. To fix one, spread adhesive on its back and press it onto the wall; panels cut to fit at the edges, and the joins are filled with filler and wiped clean, with no special equipment needed. Adhesive and filler are sold separately. PVC is waterproof, so the panels wipe clean with a damp cloth and need little upkeep. For a calm, ordered look, run them across one whole wall and keep what stands in front of it simple, so the diamonds and scrolls carry the room.
Specification
| Pattern |
Floral Scroll Diamond |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
12mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Floral Scroll Diamond pattern look like?
A diamond outlined by two raised lines fills the panel and frames a central scroll of curving stems and teardrop-tipped leaves, with a scalloped fan in each corner.
How big is each panel and how many cover a square metre?
Each panel is 50 x 50cm, so four of them cover one square metre of wall, which keeps planning a wall simple.
Where can these 3D wall panels go?
They are made for interior walls in homes, offices, hotels and shops, and they work especially well across a single feature wall.
How do I fix the panels to the wall?
Spread adhesive on the back of each panel and press it onto the wall, cutting panels to fit where the wall ends. Then fill the joins with filler and wipe them clean. No special equipment is needed.
Is anything else needed to put them up?
Yes, you will need your own adhesive to fix the panels and filler for the joins, as neither comes with them.
How do I keep the panels clean?
PVC is waterproof, so a wipe with a damp cloth keeps the panels clean, and they need very little maintenance beyond that.