Description
Our Fanned Corner Leaves 3D wall panels bring a quiet botanical pattern to a plain wall. On each white PVC panel, four fans of slender, pointed, leaf-like blades spread inwards from the corners, leaving the centre and the middle of each edge flat and plain. Each fan is centred on a diagonal, and the fans at the top left and bottom right are a little fuller than the other two, which gives the design a gentle, natural lean. The blades stand out from a flat ground in a relief 13mm deep, rounded along their length. Each panel is a 50cm square.
They suit interior walls in homes, offices, hotels and shops, and they come into their own on a feature wall behind a bed, a sofa or a reception desk. Where the corners of neighbouring panels meet, the fans gather into clusters of leaves, with calm, open ground between them, so a whole wall reads as loose and airy. When light falls across the wall from a window or a lamp to one side, each blade picks up a highlight on one edge and a soft shadow on the other, and the white wall shifts in character as the day goes on.
Each panel is formed from a 0.8mm PVC sheet. Fitting needs no special equipment: spread adhesive on the back of the panel, press it onto the wall, cut panels to fit at the edges, then fill the joins with filler and wipe them clean so the pattern runs on unbroken. Adhesive and filler are sold separately. Four panels cover one square metre, which makes it simple to work out how many a wall needs. The PVC is waterproof and low maintenance, and a damp cloth wipes it clean. For the calmest look, run the panels across the whole wall and keep the furniture in front simple.
Specification
| Pattern |
Fanned Corner Leaves |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
13mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Fanned Corner Leaves pattern look like?
Four fans of slender, pointed, leaf-like blades spread inwards from the corners of each white panel, leaving the centre and the middle of each edge plain, with two of the fans a little larger than the others.
How big is each panel and how many will I need?
Each panel is a 50 x 50cm square, and four panels cover one square metre, so the area of your wall in square metres tells you how many panels it needs.
How are the panels fixed to the wall?
Spread adhesive on the back of each panel and press it firmly onto the wall. Once the panels are up, fill the joins with filler and wipe them clean. No special equipment is needed.
Do I need to buy anything else to fit them?
Yes, you will need adhesive to fix the panels and filler for the joins, as neither comes with the panels and both are bought on their own.
Can the panels be cut to fit my wall?
Yes, the panels can be cut to fit at the edges of a wall, so the pattern can run neatly right up to a corner or a ceiling.
How do I clean the panels?
The white PVC is waterproof and low maintenance, so wiping the panels over with a damp cloth is all the cleaning they need.