Description
Our Faceted Star Grid 3D wall panels set a neat geometric pattern in relief across a square of white PVC. Fine straight grooves divide each panel into a grid of small square cells. Within every cell, angled triangular facets meet at the centre to form a four-pointed star, and the same star repeats in straight rows and columns. The relief is 12mm deep, enough for every facet to read clearly from across a room. Each panel is a 50 x 50cm square.
These panels are made for interior walls, whether at home, in an office, a hotel or a shop. They work well as a feature wall behind a sofa or bed or along a hallway, where the repeat gives a calm, ordered texture rather than a busy one. Seen face on under even light, the grid reads quietly. When light falls across the wall from a window or a lamp to one side, every facet catches the light on one face and falls into shade on the other, and the stars come forward in sharp relief. Because the star is the same in every cell, the grid carries on from one panel to the next.
Each panel is formed from a 0.8mm sheet. To fit, spread adhesive on the back of the panel and press it onto the wall. No special equipment is needed. Panels cut to fit at the edges of the wall, and the joins are filled with filler and wiped clean for tidy lines. Adhesive and filler are sold separately. Four panels cover one square metre, which makes it simple to work out how many your wall needs. Care is low maintenance: a wipe with a damp cloth keeps the facets looking fresh. We like them run from floor to ceiling on one wall, with the walls around kept plain so the star grid has room to show.
Specification
| Pattern |
Faceted Star Grid |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
12mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Faceted Star Grid pattern look like?
Fine straight grooves divide the panel into small square cells. In each cell, angled triangular facets meet in a four-pointed star, set in a relief 12mm deep and repeated in straight rows and columns.
How big is each panel and how many will I need?
Each panel is a 50 x 50cm square, and four of them cover one square metre, so measure your wall and work out the number from there.
How are the panels fixed to the wall?
Spread adhesive across the back of the panel and press it firmly onto the wall. Then fill the joins with filler and wipe them clean. No special equipment is needed.
Do the panels come with adhesive?
No. You will need to buy adhesive for fixing and filler for the joins on top of the panels themselves.
Can I cut the panels to fit my wall?
Yes, the panels cut to fit, so you can trim them at the edges of a wall and fill the joins for a neat result.
How do I keep the panels clean?
The panels are low maintenance. Wipe them over with a damp cloth whenever dust settles in the grooves and facets.