Faceted Diagonal Cross 3D PVC Wall Panels 50 x 50cm - White

Our Faceted Diagonal Cross 3D wall panels bring a bold geometric relief to a plain wall. A large diagonal cross of broad faceted ridges runs from corner to corner and meets at the centre, so a single motif fills each panel. Each of the four triangular spaces between its arms holds a chevron pointing in towards the centre, split by the panel's centre line, with a plain triangular facet between it and the edge. The relief stands 25mm deep, enough for each angled face to catch the light in its own way. Each white PVC panel is a 50 x 50cm square.

These panels are made for interior walls in homes, offices, hotels and shops. Behind a bed or a sofa, along a hallway, or on the wall behind a reception desk, a run of them makes a feature wall that holds the eye without any colour at all. The pattern changes through the day: when light falls across the wall from a window or a wall light, one side of every ridge brightens while the other drops into soft grey shadow, and the cross stands out sharply. In flatter, even light it settles back into a quieter white texture.

Each panel is formed from a 0.8mm sheet. Fitting needs no special equipment: spread adhesive on the back of the panel and press it onto the wall, cut panels to fit where the wall ends, then fill the joins with filler and wipe them clean. Adhesive and filler are sold separately. Four panels cover one square metre, which makes it simple to work out how many your wall needs. The panels are waterproof and low maintenance, so a damp cloth is all it takes to clear dust from the facets. Run them across a whole wall for the boldest effect, or keep them to one section framed by plain wall for something calmer.

What does the Faceted Diagonal Cross pattern look like?

A large diagonal cross of broad faceted ridges runs corner to corner on every panel and meets in the middle, with a chevron in each of the four triangles between its arms pointing towards the centre.

How big is each panel and how many do I need?

Each panel is a 50 x 50cm square, and four of them cover one square metre of wall, which makes it easy to plan how many your wall needs.

How are these 3D wall panels fixed to the wall?

You spread adhesive on the back of each panel and press it firmly onto the wall. No special equipment is needed, and the joins are filled with filler and wiped clean afterwards.

What else do I need to fit them?

You will need adhesive to fix the panels and filler for the joins. Both are sold on their own, so have them to hand before you start.

Can I cut the panels to fit my wall?

Yes, each panel can be cut to fit, so the last panels in a row or column can be trimmed neatly where the wall ends.

How do I clean the panels?

They are low maintenance: wipe them over with a damp cloth to lift any dust that collects in the angled facets of the relief.