Description
The Eris is a 600mm dual-disc LED wall light with two overlapping circular metal plates finished in matt white, each housing an integrated LED module behind the disc face. The two LEDs combine to deliver 16W total power and 1280 lumens at 3000K warm white, casting a soft halo glow across the wall surface in a 120° beam angle. The overlapping discs create an asymmetric composition when viewed from the side, with the smaller disc positioned slightly offset from the larger.
Designed for living rooms, bedrooms, hallways and landings where ambient wash lighting is needed without a traditional shade or exposed bulb, the Eris sits 32mm proud of the wall and spreads light evenly across plaster or painted surfaces either side of the fitting. The matt white finish suits neutral, Scandinavian and contemporary colour schemes, and the low-profile design works on walls with limited clearance above furniture or artwork. The fitting is non-dimmable and connects to standard UK 240V mains via a rear backplate.
The two metal discs are welded to a central horizontal bar, giving the fitting a total length of 600mm and a height of 285mm from the bottom edge of the lower disc to the top edge of the upper disc. At 1.18kg the fitting requires solid wall fixings into masonry or studs rather than plasterboard alone. The integrated LEDs are rated for 30,000 hours typical use and are not user-replaceable, so the fitting is retired when the LEDs reach end of life.
Specification
| Colour Finish 1 |
White |
| Length |
600mm |
| Height |
285mm |
| Projection |
32mm |
| Number Of Bulbs |
2 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K Warm White |
| Beam Angle |
120° |
| Lumen |
1280lm |
| Power Consumption |
16W |
| Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| Weight |
1.18KG |
| Warranty |
3 Year |
Frequently Asked
Is the Eris dimmable?
No. The integrated LED modules are non-dimmable and must be connected to a standard switched mains circuit without a dimmer in line.
Can the LEDs be replaced when they fail?
No. The LEDs are integrated into the metal disc housings and are not user-replaceable. The fitting is rated for approximately 30,000 hours of use, after which the entire unit is retired.
What wall fixings are needed?
At 1.18kg the Eris requires solid wall fixings into masonry, brick or wall studs. Plasterboard alone will not support the weight safely. Use suitable wall plugs and screws rated for at least 2kg load.
What size wall does it suit?
The 600mm length suits walls in medium to large rooms. For smaller hallways or bedrooms under 12m² the Eris may appear oversized. Consider room width and the space either side of the fitting when planning placement.