Free Delivery on all orders over £99*
Save 30%

Ecliptus 150W Constant Voltage LED Driver - 24V 1-10V Dimmable

£11799
RRP £16800
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Ecliptus is a 150W constant voltage LED driver designed for 24V DC LED systems, with 1-10V analogue dimming control. The driver converts 230V AC mains input to a regulated 24V DC output at up to 6.25A, powering LED strip lights, architectural lighting runs, under-cabinet installations and other low-voltage LED fixtures that operate on constant voltage rather than constant current.

The 1-10V dimming protocol allows the driver to be paired with compatible wall dimmers, lighting control panels and building management systems that output a 1-10V control signal. At 10V the driver delivers full output; at 1V it dims to a minimum level (typically 5-10% of full output depending on the connected LED load). The dimming curve is smooth and flicker-free across the range, making the driver suitable for hospitality, retail and residential applications where controlled ambience is needed.

The white plastic housing measures 352mm long by 43mm deep, fitting into ceiling voids, behind panels and inside architectural recesses where space is limited. The driver carries an IP20 rating, restricting it to dry indoor locations away from direct water contact. Input and output terminals accept solid or stranded wire for permanent installation, and the unit includes short-circuit, overload and over-temperature protection to prevent damage during fault conditions. Ideal Lux backs the driver with a 5-year warranty.

Specification
Length (mm) 352
Projection (mm) 43
Dimmable Yes
IP Rating IP20
Warranty 5 Years
Frequently Asked

What voltage output does this driver provide?

The Ecliptus outputs 24V DC at up to 6.25A (150W maximum load). It is designed for constant voltage LED systems such as 24V LED strip lights, not for constant current LED fittings.

What dimming control does it require?

The driver uses 1-10V analogue dimming. You need a compatible 1-10V dimmer switch or control panel that outputs a voltage signal between 1V (minimum dim) and 10V (full brightness). Standard trailing-edge or leading-edge phase-cut dimmers are not compatible.

Can it be used outdoors or in bathrooms?

No. The IP20 rating restricts the driver to dry indoor locations only. It must be installed in a ceiling void, control panel or similar enclosure away from direct water contact, condensation and outdoor weather.

How is it wired into a lighting system?

Mains 230V AC connects to the input terminals. The 24V DC output terminals connect to the positive and negative lines of the LED strip or fixture. The separate 1-10V dimming input connects to the control signal from your dimmer or control panel. Wiring should be carried out by a qualified electrician.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Ecliptus is a 150W constant voltage LED driver designed for 24V DC LED systems, with 1-10V analogue dimming control. The driver converts 230V AC mains input to a regulated 24V DC output at up to 6.25A, powering LED strip lights, architectural lighting runs, under-cabinet installations and other low-voltage LED fixtures that operate on constant voltage rather than constant current.

    The 1-10V dimming protocol allows the driver to be paired with compatible wall dimmers, lighting control panels and building management systems that output a 1-10V control signal. At 10V the driver delivers full output; at 1V it dims to a minimum level (typically 5-10% of full output depending on the connected LED load). The dimming curve is smooth and flicker-free across the range, making the driver suitable for hospitality, retail and residential applications where controlled ambience is needed.

    The white plastic housing measures 352mm long by 43mm deep, fitting into ceiling voids, behind panels and inside architectural recesses where space is limited. The driver carries an IP20 rating, restricting it to dry indoor locations away from direct water contact. Input and output terminals accept solid or stranded wire for permanent installation, and the unit includes short-circuit, overload and over-temperature protection to prevent damage during fault conditions. Ideal Lux backs the driver with a 5-year warranty.

    Specification
    Length (mm) 352
    Projection (mm) 43
    Dimmable Yes
    IP Rating IP20
    Warranty 5 Years
    Frequently Asked

    What voltage output does this driver provide?

    The Ecliptus outputs 24V DC at up to 6.25A (150W maximum load). It is designed for constant voltage LED systems such as 24V LED strip lights, not for constant current LED fittings.

    What dimming control does it require?

    The driver uses 1-10V analogue dimming. You need a compatible 1-10V dimmer switch or control panel that outputs a voltage signal between 1V (minimum dim) and 10V (full brightness). Standard trailing-edge or leading-edge phase-cut dimmers are not compatible.

    Can it be used outdoors or in bathrooms?

    No. The IP20 rating restricts the driver to dry indoor locations only. It must be installed in a ceiling void, control panel or similar enclosure away from direct water contact, condensation and outdoor weather.

    How is it wired into a lighting system?

    Mains 230V AC connects to the input terminals. The 24V DC output terminals connect to the positive and negative lines of the LED strip or fixture. The separate 1-10V dimming input connects to the control signal from your dimmer or control panel. Wiring should be carried out by a qualified electrician.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.