Description
The stem rises straight and then bends forward over the top, so the lampholder sits out above the table rather than directly over the base. Ours comes in satin nickel with black, standing 50cm tall on a small footprint that tucks in neatly behind a book stack or a picture frame. It takes a single E27 lamp of up to 20W, and an inline switch on the flex puts control at the cable rather than up under a shade. The lamp is supplied without a shade, so the top is yours to choose.
That forward reach is what makes the shape useful: light lands on the page or the surface in front of it, not on the wall behind. It suits a bedside table where you want to read without the shade in your eyeline, a desk corner, or a console in an entrance hall. We often suggest it in pairs on a sideboard, and it is one we reach for in a small sitting room where a floor lamp would crowd the chair. It will dim with a compatible lamp and a separate dimmer, and the body is double insulated.
The satin nickel has a soft low shine that hides fingermarks better than a polished finish, with the black picking out the holder and flex. A light dusting along the arm keeps it right; if it needs more, a barely damp cloth over a cold lamp and a dry one straight after. It carries a one year warranty. The same curved shape is offered as a floor lamp, in this satin nickel and black as well as satin black and antique brass, and the range runs to shallow cone metal shades in finishes from pewter and beige stone to painted antique copper. Lamps and shades are bought separately.
Specification
| Colour |
Satin Nickel |
| Second Colour |
Black |
| Weight |
1.50KG |
| Length |
235mm |
| Width |
150mm |
| Height |
500mm |
| Materials Used |
Iron |
| Adjustable Height |
No |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
1 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED Lamp Dependant On Shade |
| Light Distribution |
Ambient |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240~50/60HZ |
| Switch |
Yes - Inline Switch |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Cable Information |
2X 0.75mm² Black PVC round cable L=2000mm |
| Shade Included |
No |
| Pieces Included |
1 |
| Installation |
Plug-in Item |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Does this table lamp come with a shade?
No, it is sold as the base only. The matching shallow cone metal shades in the Dreifa Curved range are available separately in 210mm and 300mm sizes and a choice of finishes.
What lamp does it take?
One E27 lamp, up to 20W. An LED is the sensible choice here, and the shade you pair it with will guide the shape and size of lamp that looks best.
How big is it?
It stands 500mm tall, with a base 150mm wide and a forward reach of 235mm, so allow for the arm extending over the table when you position it.
Can it be dimmed?
Yes, with a dimmable lamp and a compatible dimmer. No dimmer is supplied with the lamp.
How is it switched on?
There is an inline switch on the flex, so you operate it at the cable rather than reaching up to the lampholder.
How should I clean the satin nickel?
Dust it with a soft dry cloth. For marks, use a barely damp cloth on a cold lamp and dry it straight away, avoiding polishes and abrasive creams.