Free Delivery on all orders over £99*

Dot Single Tilt Square Plaster-In Recessed Downlight - Black

£1999
The RRP is the manufacturer's recommended retail price of the item.
663 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Dot is a square recessed downlight with a tiltable GU10 lamp holder set inside a black aluminium bezel and a plaster-in frame. The outer frame is designed to be skimmed over with plaster during installation, leaving only the square black bezel visible once the ceiling is finished. The lamp holder tilts up to approximately 30 degrees from vertical, allowing light to be aimed at a feature wall, artwork, or specific area of a room.

Designed for new-build residential, refurbishment projects, and commercial fit-outs where a flush, architectural ceiling finish is needed, the Dot suits living rooms, hallways, bedrooms, retail spaces, and hospitality interiors. The 112mm x 90mm aperture and 42mm height fit standard UK ceiling voids with 100mm+ clearance above the plasterboard. The GU10 fitting accepts any standard GU10 LED or halogen bulb up to 50W (sold separately), giving control over colour temperature, beam angle, and dimming behaviour.

The black powder-coated aluminium bezel absorbs ceiling reflections and creates a defined contrast against white or light-grey plaster, giving the fitting a graphic, grid-like appearance when used in multiples. The IP20 rating restricts use to dry indoor areas — it is not suitable for bathrooms, wet rooms, or outdoor soffits. The plaster-in frame requires careful installation to avoid plaster getting into the lamp holder recess during skimming.

Specification
Height 4.2cm
Length 11.2cm
Width 9cm
Finish Black
Construction Aluminium
IP Rating IP20
Voltage AC 220-240
Bulb Base GU10
Wattage 50
Warranty 2 Year Guarantee
Downloads

Product Manual

Frequently Asked

What ceiling void depth is required?

The fitting is 42mm high, so a minimum 100mm void clearance above the plasterboard is recommended to allow for the lamp holder, bulb length, and wiring connections. GU10 LED bulbs are typically 50-55mm long.

Can it be used in bathrooms?

No. The IP20 rating means it is only suitable for dry indoor areas. For bathrooms, wet rooms, or outdoor soffits, you need a fitting rated IP44 or higher.

How is the plaster-in frame installed?

The outer frame is fixed to the ceiling joists or noggins before plasterboarding. The plasterboard is cut to fit around the frame, then the frame edges are skimmed over with plaster to create a flush finish. The black bezel and lamp holder are fitted after plastering is complete.

What bulb should I use?

The fitting takes any standard GU10 bulb up to 50W. Most installations use a GU10 LED between 4-7W and 2700K-3000K warm white for ambient lighting, or 4000K cool white for task lighting in kitchens or offices. Beam angle depends on use — narrow (25-38°) for accent lighting, wide (60-100°) for general room light.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Takes standard bulbs

Takes standard GU10 bulbs, so you choose the brightness and colour to suit the room.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Dot is a square recessed downlight with a tiltable GU10 lamp holder set inside a black aluminium bezel and a plaster-in frame. The outer frame is designed to be skimmed over with plaster during installation, leaving only the square black bezel visible once the ceiling is finished. The lamp holder tilts up to approximately 30 degrees from vertical, allowing light to be aimed at a feature wall, artwork, or specific area of a room.

    Designed for new-build residential, refurbishment projects, and commercial fit-outs where a flush, architectural ceiling finish is needed, the Dot suits living rooms, hallways, bedrooms, retail spaces, and hospitality interiors. The 112mm x 90mm aperture and 42mm height fit standard UK ceiling voids with 100mm+ clearance above the plasterboard. The GU10 fitting accepts any standard GU10 LED or halogen bulb up to 50W (sold separately), giving control over colour temperature, beam angle, and dimming behaviour.

    The black powder-coated aluminium bezel absorbs ceiling reflections and creates a defined contrast against white or light-grey plaster, giving the fitting a graphic, grid-like appearance when used in multiples. The IP20 rating restricts use to dry indoor areas — it is not suitable for bathrooms, wet rooms, or outdoor soffits. The plaster-in frame requires careful installation to avoid plaster getting into the lamp holder recess during skimming.

    Specification
    Height 4.2cm
    Length 11.2cm
    Width 9cm
    Finish Black
    Construction Aluminium
    IP Rating IP20
    Voltage AC 220-240
    Bulb Base GU10
    Wattage 50
    Warranty 2 Year Guarantee
    Downloads

    Product Manual

    Frequently Asked

    What ceiling void depth is required?

    The fitting is 42mm high, so a minimum 100mm void clearance above the plasterboard is recommended to allow for the lamp holder, bulb length, and wiring connections. GU10 LED bulbs are typically 50-55mm long.

    Can it be used in bathrooms?

    No. The IP20 rating means it is only suitable for dry indoor areas. For bathrooms, wet rooms, or outdoor soffits, you need a fitting rated IP44 or higher.

    How is the plaster-in frame installed?

    The outer frame is fixed to the ceiling joists or noggins before plasterboarding. The plasterboard is cut to fit around the frame, then the frame edges are skimmed over with plaster to create a flush finish. The black bezel and lamp holder are fitted after plastering is complete.

    What bulb should I use?

    The fitting takes any standard GU10 bulb up to 50W. Most installations use a GU10 LED between 4-7W and 2700K-3000K warm white for ambient lighting, or 4000K cool white for task lighting in kitchens or offices. Beam angle depends on use — narrow (25-38°) for accent lighting, wide (60-100°) for general room light.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.