Description
Our Diagonal Nested Leaf 3D wall panels carry a single large pointed leaf that runs diagonally across the face, from near the bottom left to near the top right, with a smaller leaf nested inside its lower end along the same line. The motif appears once on each panel, set on a flat ground that fills the two remaining corners, so a wall of them reads as a steady run of leaves on the diagonal. The leaf forms are clearly raised, with a narrow stepped edge around each one, in a relief 20mm deep. Each panel is a white 50 x 50cm square.
They are made for interior walls in homes, offices, hotels and shops, and they suit anyone who wants a feature wall with a soft, natural motif rather than a hard geometric one. That depth of relief pays off when light falls across the wall: side light from a window or a wall lamp catches the stepped edges and lays a soft shadow along the lower side of each leaf, while flat, even light keeps the pattern quiet. Behind a bed, a sofa or a reception desk, the leaves give a plain wall a gentle sense of movement.
Each panel is formed from a 0.8mm PVC sheet. PVC is waterproof, and the surface wipes clean with a damp cloth, so it asks little upkeep. Fitting needs no special equipment: spread adhesive on the back of the panel and press it onto the wall, cut panels to fit where needed, then fill the joins with filler and wipe them clean. Adhesive and filler are sold separately. Four panels cover one square metre, which makes it simple to work out how many a wall needs once it is measured. For a calm finish, set the panels so every leaf points the same way; turning alternate panels gives a livelier, criss-cross rhythm.
Specification
| Pattern |
Diagonal Nested Leaf |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
20mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What pattern do these wall panels have?
Each panel carries one large pointed leaf running diagonally from near the bottom left corner to near the top right, with a smaller leaf nested inside its lower end, on a flat white ground.
How big is each panel and how many will I need?
Each panel is a 50 x 50cm square, and four panels cover one square metre, so measure your wall first to work out how many you need.
How are the panels fixed to the wall?
Spread adhesive on the back of each panel and press it onto the wall, cutting panels to fit where needed, then fill the joins with filler and wipe them clean. No special equipment is needed.
Is anything else needed to fit them?
Yes, you will need adhesive to fix the panels to the wall and filler for the joins, as neither comes with the panels.
Where can I use these 3D wall panels?
They are made for interior walls in homes, offices, hotels and shops, and they work well as a feature wall behind a bed, a sofa or a reception desk.
How do I clean the panels?
Wipe them over with a damp cloth. PVC is waterproof, so the panels are low maintenance and need little more than an occasional wipe to look their best.