Diagonal Lozenge Lattice 3D PVC Wall Panels 50 x 50cm - White

Our Diagonal Lozenge Lattice 3D wall panels bring a crisp geometric pattern to a plain wall. Each white PVC panel is a 50cm square with a relief 14mm deep. Narrow, pointed lozenges sit on the diagonal in six rows of six, each turned the opposite way to its neighbour, so their tips meet in fours to form small X-shaped crossings. Together they trace a diamond lattice across the panel, with flat diamond-shaped spaces left between them. The lozenges are clearly raised and bevelled. Four panels cover one square metre, so working out how many your wall needs is simple.

These panels are made for interior walls in homes, offices, hotels and shops. They suit a feature wall behind a bed or sofa, a hallway that needs some character, a reception area or the wall behind a shop counter. The pattern changes with the light. When it falls from one side, the lozenges catch it on one face and throw shadows along their lower sides, so the lattice stands out clearly; in soft, even light the wall reads as a quieter white texture. A wall light or window to one side shows the pattern at its best.

Each panel is formed from a 0.8mm PVC sheet. To fit them, spread adhesive on the back of a panel and press it onto the wall, then cut panels to fit at the edges and corners. Fill the joins with filler and wipe them clean, so the lattice runs on from one panel to the next. No special equipment is needed. Adhesive and filler are sold separately. The PVC is waterproof, and the panels are low maintenance: a wipe with a damp cloth keeps them clean. For the strongest effect, run them across a whole wall from floor to ceiling, and keep the furniture in front simple so the pattern has room to show.

What does the Diagonal Lozenge Lattice pattern look like?

Narrow, pointed lozenges run diagonally in six rows of six, alternating direction so their tips meet in X-shaped crossings and trace a diamond lattice with flat diamond spaces between them.

How big is each panel and how much wall does it cover?

Each panel is a 50 x 50cm square. Four of them cover one square metre, which makes it easy to plan how many your wall needs.

How are the panels fixed to the wall?

Spread adhesive over the back of each panel and press it onto the wall. Cut panels to fit at the edges, then fill the joins with filler and wipe them clean. You need no special equipment.

Do I need to buy anything else to put them up?

Yes. The adhesive that holds the panels to the wall and the filler for the joins do not come with the panels, so you will need to buy both.

Where can I use these 3D wall panels?

They are designed for interior walls in homes, offices, hotels and shops, and work well as a feature wall in a living room, bedroom, hallway or reception area.

How do I clean the panels?

Wipe them over with a damp cloth whenever they need it. The white PVC is waterproof and low maintenance, so a quick wipe is all the care they ask for.