Description
Our Diagonal Faceted Shards 3D wall panel brings a sharp, angular relief to a plain wall. Long, narrow shards taper to fine points and run in parallel from lower left to upper right, staggered and overlapping, each one a crisp ridge between a lit face and a shaded face. The longest cross most of the panel on the diagonal, with shorter shards gathered towards the top left and bottom right corners. The relief is 30mm deep, so the facets stand well proud of the background. Each panel is white PVC, a 50cm square.
These 3D wall panels are made for interior walls in homes, offices, hotels and shops. Run them across a feature wall behind a sofa, a bed, a reception desk or a shop counter, and the rising diagonals carry the eye across the room. The look changes with the light: a lamp or window to one side throws deep shade into the steep facets and picks out every ridge, while soft, even light gives a quieter, more graphic pattern of white on white. Set side by side, the panels repeat the diagonal pattern across the whole wall, a crisp geometric texture for a modern living room, bedroom or workplace.
Each panel is made from a 0.8mm sheet. To fit one, spread adhesive on its back and press it onto the wall; panels can be cut to fit, and the joins are filled with filler and wiped clean, with no special equipment needed. Adhesive and filler are sold separately. Four panels cover one square metre, which makes it simple to work out how many a wall needs. The PVC is waterproof and low maintenance: a wipe with a damp cloth keeps it clean. Keep surrounding walls and furnishings simple so the relief stays the focus.
Specification
| Pattern |
Diagonal Faceted Shards |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
30mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Diagonal Faceted Shards pattern look like?
Long, narrow shards taper to points and run in parallel from lower left to upper right, staggered and overlapping, each with a crisp ridge between a lit face and a shaded face.
What size is each panel and how much wall does it cover?
Each panel measures 50 x 50cm, and four panels cover one square metre, which is the figure to use when measuring up your wall.
How are the panels fixed to the wall?
Spread adhesive across the back of each panel and press it onto the wall; no special equipment is needed to fit them.
What else do I need to fit the panels?
You will need to buy adhesive and filler on their own: adhesive for the back of each panel and filler for the joins between them.
Can I cut the panels to fit my wall?
Yes, the panels can be cut to fit, and the joins are then filled with filler and wiped clean for a neat finish.
How do I clean the panels?
The PVC is waterproof and low maintenance, so a wipe with a damp cloth is all the panels need to stay clean.