Description
Our Diagonal and Vertical Ribs 3D wall panels set two geometric fields of narrow straight ribs against each other on a 50cm square of white PVC. On the left, the ribs run diagonally down from the edge; on the right, vertical ribs rise from the bottom, their angled tops stepping up to the top-right corner. A plain, flat triangle fills the top with its point at the centre, so the edges of the ribbing form one wide V across the panel. The ribs stand in a relief 15mm deep with bevelled edges, enough to cast clear shadows when light comes from the side, while the flat triangle gives the eye a calm space to rest.
These panels are for interior walls in homes, offices, hotels and shops. Run them across a feature wall behind a sofa or bed, along a reception area or down a hallway, and the V repeats from panel to panel in a rhythm of diagonals and uprights. As daylight moves across the room the ribs catch it at different angles, so the two fields shift in tone against each other through the day while the flat triangles stay bright and still. When working out how many a wall needs, four panels cover one square metre, so measure the area and allow a few extra for cuts.
Each panel is made from a 0.8mm sheet, and fitting needs no special equipment. Spread adhesive on the back of the panel and press it onto the wall, cutting panels to fit at the edges, then fill the joins with filler and wipe them clean. Adhesive and filler are sold separately. The panels are low maintenance: a wipe with a damp cloth keeps the ribs fresh. For styling, the ribs sit happily with warm wood, linen and natural textures, and a single feature wall often says more than panelling a whole room.
Specification
| Pattern |
Diagonal and Vertical Ribs |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
15mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Diagonal and Vertical Ribs pattern look like?
Narrow straight ribs fill the panel in two fields: on the left they run diagonally down from the edge, and on the right vertical ribs rise with angled tops stepping up to the top-right corner. A flat triangle fills the top, so the ribbing forms one wide V.
How big is each panel, and how many do I need?
Each panel is a 50 x 50cm square, and four of them cover one square metre, so measure your wall and allow a few spares for cutting.
How are the panels fitted, and can I cut them?
Spread adhesive on the back of each panel and press it onto the wall, cutting panels to fit at edges and corners. Then fill the joins with filler and wipe them clean; no special equipment is needed.
What else do I need to buy?
You will also want adhesive for fixing and filler for the joins, as neither comes with the panels and both are bought separately.
Where can I use these panels?
They are made for interior walls in homes, offices, hotels and shops, and they work especially well on a feature wall where light can play across the ribs.
How do I clean them?
They are low maintenance: a wipe with a damp cloth is all the white PVC surface needs to look fresh again.