Description
Our Diagonal and Horizontal Ribs 3D wall panels carry a broad band of straight raised ribs running diagonally from the bottom-left corner of each panel to the top-right. In the two remaining corners, triangles of horizontal ribs meet the band, each rib stopping with an angled end where the two directions join. The ribs are bevelled and stand proud in a relief 15mm deep, which gives the geometric pattern clear shadow lines and a real sense of depth. Each panel is white PVC and a 50cm square.
These panels suit interior walls in homes, offices, hotels and shops, and they make a strong feature wall behind a bed or sofa, along a hallway or behind a reception desk. The bevelled ribs catch light along their upper edges and hold shadow along their lower faces, so side light from a window or a wall lamp turns the diagonals and horizontals into crisp stripes of light and shade that shift softly as the day moves on. Repeated across a wall, the pattern builds into a lively geometric rhythm that sits well in a modern scheme without overwhelming it. Four panels cover one square metre, which makes working out how many a wall needs straightforward.
Each panel is formed from a 0.8mm sheet. Fitting needs no special equipment: spread adhesive on the back of the panel, press it onto the wall, and cut panels to fit where the wall ends. The joins are then filled with filler and wiped clean, leaving a tidy, continuous surface. Adhesive and filler are sold separately. PVC is waterproof and the panels wipe clean with a damp cloth, so they need very little looking after. For the best effect, keep the furniture in front of the wall simple and place a lamp to one side, where its light can rake across the ribs in the evening.
Specification
| Pattern |
Diagonal and Horizontal Ribs |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
15mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Diagonal and Horizontal Ribs pattern look like?
A wide band of raised, bevelled ribs runs diagonally from one corner of each panel to the opposite corner, with triangles of horizontal ribs filling the other two corners.
How big is each panel and how many will I need?
Each panel is a 50 x 50cm square, and four of them cover one square metre, so measure your wall in square metres to work out how many you need.
How are the panels fixed to the wall?
You spread adhesive across the back of each panel and press it firmly onto the wall, with no special tools or equipment needed.
What else will I need to fit them?
You will need a suitable adhesive for the backs of the panels and filler for the joins, as both are bought separately from the panels themselves.
Can the panels be cut to fit my wall?
Yes, they cut to fit at the edges of the wall, and the joins between panels are filled with filler and wiped clean for a neat finish.
How do I clean these 3D wall panels?
The PVC is waterproof, so a wipe with a damp cloth is all the panels need to keep looking fresh from day to day.