Davos Outdoor LED Wall Light 10W 3000K - Sand White

The Davos is a 150mm cube outdoor wall light with integrated bi-directional LEDs that project warm white light both upwards and downwards from a sand white painted aluminium body. The two 10W LED modules inside the housing combine to deliver 1830 lumens at 3000K across a 120-degree beam angle, creating grazing light on the wall surface above and below the fitting.

Designed for residential and commercial facades, the Davos suits entrances, terrace walls, garden boundaries and architectural features where wall-mounted accent lighting is needed. The IP65 rating protects the internal LEDs and driver from rain, dust and low-pressure water jets, making the fitting suitable for exposed exterior positions. The 100mm projection from the wall gives the fitting sufficient presence to hold definition on larger facades without overwhelming domestic-scale entrances.

The sand white powder-coated finish sits between pure white and warm cream, giving the housing enough tonal variation to avoid looking clinical against painted render or light-coloured brick. The cube profile reads as a simple geometric form in daylight and as a source of vertical wash light after dark. The fitting weighs 2kg once fully assembled and mounts to a standard UK outdoor back box via rear-access fixing points concealed behind the housing.

The integrated LEDs are non-dimmable and deliver their full 1830lm output immediately on switching, with no warm-up period. The 3000K colour temperature sits in the warm white range, producing light that appears amber-toned against cool white architectural lighting but neutral against incandescent or halogen sources. The fitting is supplied with installation hardware and draws 20W total from the 220-240V AC supply.

What does IP65 mean for outdoor use?

IP65 confirms the fitting is fully dust-tight and protected against water jets from any direction. The Davos can be installed in exposed positions subject to rain, including under soffits, on open terrace walls, and on facades with no overhead shelter.

Is the LED replaceable?

The LED modules are integrated into the fitting and are not user-replaceable. The LED lifespan is typically rated at 25,000-30,000 hours, approximately 10-12 years of typical domestic use at 6-8 hours per evening.

Can it be used on a dimmer switch?

No. The integrated LED driver is non-dimmable. Connecting the fitting to a dimmer circuit may cause flickering or prevent the light from operating.

How is the bi-directional effect created?

Two separate LED modules inside the cube housing direct light through openings at the top and bottom of the fitting. This creates vertical grazing light on the wall surface above and below, with no light emitted forwards from the front face of the cube.