Description
The Dats dining table is a clean-lined outdoor dining table on four straight legs, with a slim frame of extruded aluminium finished in polyester powder coating. It stands 74cm high, the usual height for dining, so it pairs naturally with standard dining chairs. The top comes in seven sizes, from 240cm long and 100cm wide down to 90cm by 90cm, including a 140cm by 140cm square for a table everyone can reach across.
It is made for outdoor use and resists weathering and sunlight, so it belongs on a garden terrace, a patio or beside the pool, while the smaller sizes suit a balcony. The 240cm long top is the one for big family lunches, and the 90cm square tucks into a quiet corner. We sell it in nine tops across HPL compact, iroko slats and Dekton, such as White HPL Compact, Anthracite HPL Compact and Brown HPL Compact. It also comes in fifteen powder-coated frame colours, such as Textured White, Textured Ivory and Stone, so you can match it to your paving, walls or planting.
The HPL compact tops are 10mm thick and wipe clean with a damp cloth and warm water or a mild detergent. Iroko slats are 20mm thick. The wood turns silver-grey over time and may change colour or develop small cracks with humidity, so the maker recommends a waterproof sealant twice a year. Dekton, 8mm thick, needs only neutral soap on a damp microfibre sponge. Clean the frame with warm water and neutral soap, then dry it to avoid water marks. The table was designed by Andrés Bluth and is made to order in Barcelona, Spain. It arrives unassembled in three boxes, so allow a little time to put it together where it will stand.
Made to order, dispatched in about 5–6 weeks.
Specification
| Height |
74cm |
| Top sizes |
240 x 100, 200 x 100, 185 x 90, 160 x 90, 140 x 90, 140 x 140 or 90 x 90cm |
| Frame |
Extruded aluminium, polyester powder coating |
| Tops |
HPL compact (10mm) in white, anthracite or brown; iroko slats (20mm); Dekton (8mm) |
| Frame colours |
15 |
| Packed weight |
25 to 76kg, by size and top |
| Packed volume |
0.6 to 1.6 m³, by size |
| Assembly |
Delivered unassembled, in 3 boxes |
| Use |
Outdoors: resistant to weathering and sunlight |
| Made in |
Barcelona, Spain |
| Warranty |
5 years for domestic use, 2 years for commercial use (manufacturer); cushions, covers and fabrics are not covered |
| Dispatch |
Made to order, dispatched in about 5–6 weeks |
Frequently Asked
What sizes does the Dats dining table come in?
The top comes in seven sizes. These are 240cm by 100cm, 200cm by 100cm, 185cm by 90cm, 160cm by 90cm, 140cm by 90cm, 140cm by 140cm and 90cm by 90cm. Every size stands 74cm high.
What is the table made of?
The frame is extruded aluminium with a polyester powder coating. The tops are 10mm HPL compact in white, anthracite or brown, 20mm iroko slats, or 8mm Dekton.
How do I look after an iroko top?
Iroko turns silver-grey over time and may change colour or develop small cracks with humidity and sudden changes of temperature. The maker recommends a waterproof sealant twice a year.
Does the table arrive assembled?
No. It is delivered unassembled in three boxes, so you put it together where it will stand on your terrace, patio or balcony.
Does the Dats table come with a guarantee?
It carries the maker's guarantee against manufacturing defects. This lasts five years for domestic use and two years for commercial use. Cushions, covers and fabrics are not covered.
How long will it take to arrive?
It is made to order for you, so allow about 5 to 6 weeks: about 4 weeks to make it and about a week and a half in transit.