Dalia LED Flush Ceiling Light 48W 3000K - White

The Dalia is a 500mm square flush ceiling light built from two offset white metal frames layered to create a stepped geometric form. The upper frame sits proud of the lower, giving the fitting a three-dimensional profile despite its 75mm total height. Integrated LED panels behind each frame emit 3360lm at 3000K warm white, with the light diffusing outward and highlighting the depth between the layers.

Designed for rooms with standard or lower ceiling heights where pendant or semi-flush fittings would sit too low, the Dalia suits bedrooms, hallways, and home offices needing general ambient light. The 48W LED provides enough output to light a room of approximately 15-20m² on its own, or to work as primary overhead light in a larger room paired with supplementary task or accent lighting. The flush mount sits directly against the ceiling with minimal projection.

The white powder-coated metal finish sits comfortably in contemporary, Scandinavian and minimalist interiors, and the geometric layering gives the fitting visual interest beyond a plain disc or square. The stepped arrangement casts subtle tonal variation across the frame surfaces when lit, creating definition between the planes. At 3.7kg the fitting has enough weight to feel substantial during installation but mounts to a standard ceiling rose with the included fixings.

Is the Dalia dimmable?

No. The integrated LED is non-dimmable and operates at fixed 48W output on standard 220-240V mains. It should be installed on a standard switched circuit, not a dimmer circuit.

What room size does it suit?

The 3360lm output is sufficient to light a room of approximately 15-20m² as the sole overhead fitting. In larger rooms it works well as primary general light paired with task or accent lighting.

What ceiling height is needed?

The Dalia is a flush mount with 75mm total height, designed for standard ceiling heights from 2.4m upwards. It suits rooms where pendant or semi-flush fittings would hang too low or where a clean, minimal ceiling profile is preferred.

Can it be installed in bathrooms?

The Dalia carries no IP rating so it is not suitable for bathroom zones 1 or 2 (directly above or near the bath/shower). It can be fitted in bathrooms outside these zones where there is no direct spray or steam exposure.