CyroLED Fixed and Tilt Bezel - Matt Black

The CyroLED bezel is an 86mm matt black ABS trim ring designed to fit Knightsbridge's CyroLED fixed and tilt downlight range. The bezel clips onto the downlight housing once the lamp is recessed into the ceiling cut-out, covering the edge of the aperture and providing a 4mm low-profile finished surface that sits nearly flush with the ceiling plane.

Designed for residential, commercial and hospitality installations where downlights are specified with a recessed or semi-recessed fitting, the bezel hides the cut edge of plasterboard or ceiling tile and gives a consistent finished appearance across multiple downlight positions. The matt black finish suits contemporary, industrial and monochrome interiors, and the dark tone reduces visual glare around the light source by absorbing rather than reflecting ambient light from the ceiling.

The ABS construction is lightweight, impact-resistant and dimensionally stable across typical indoor temperature ranges. The 86mm outer diameter is a standard size for UK downlight bezels, meaning the CyroLED system can be paired with the same ceiling aperture used for many other recessed fittings. The bezel works with both the fixed and tilt variants of the CyroLED downlight, with the tilt version allowing the lamp head inside to rotate within the bezel aperture for directional lighting.

Product Specification Sheet

Which CyroLED downlights does this bezel fit?

The bezel is compatible with both the fixed and tilt variants of the Knightsbridge CyroLED downlight range. It clips onto the downlight housing after the lamp is installed in the ceiling aperture.

What ceiling aperture size is required?

The 86mm bezel diameter is a standard UK downlight size. The exact cut-out diameter depends on the specific CyroLED downlight model being used — refer to the downlight's installation guide for the correct aperture size.

Can the bezel be removed after installation?

Yes. The bezel clips onto the downlight housing and can be removed for redecorating or lamp replacement without removing the entire downlight from the ceiling.

What other finishes are available?

Knightsbridge produces the CyroLED bezel in a range of finishes including white, polished chrome and brushed chrome. Use the search function at Niori to find other variants in stock.