Description
Our Curved Teardrop Splash 3D wall panels bring a sweep of movement to a plain wall. Curved teardrop forms, each with a rounded head and a long tapering tail, fan out from near the top-left corner like a splash. Three sweep right across the upper half, several curve down the left half, some with layered ribs inside them, and one small round dome sits near the bottom-right corner. The spray fills the whole panel, so the motif repeats once on every panel. The relief is clearly raised, with rounded sculpted forms standing proud of a flat ground. Each panel is white PVC, a 50cm square.
They suit interior walls in homes, offices, hotels and shops, whether behind a bed or sofa, along a hallway or as a feature wall in a reception area. Laid side by side, they build into a flowing rhythm of curling forms across the wall. The rounded forms cast soft, moderate shadows, so the pattern shifts through the day: in flat light it reads as gentle texture, and when light falls across it from the side, from a window, the curves stand out more strongly. Four panels cover one square metre, which makes it simple to work out how many a wall needs.
Each panel is formed from a 0.8mm PVC sheet. Fitting needs no special equipment: spread adhesive on the back of the panel, press it onto the wall and cut panels to fit at the edges. Fill the joins with filler and wipe them clean for a neat finish. Adhesive and filler are sold separately. PVC is waterproof, and the panels are low maintenance, needing only a wipe with a damp cloth. For styling, we like them on a single wall with simple furniture in front, so the curves have room to be seen, and a lamp set to one side to bring out the shadows.
Specification
| Pattern |
Curved Teardrop Splash |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Curved Teardrop Splash pattern look like?
Curved teardrop forms with rounded heads and long tapering tails fan out from near one corner, with a small round dome near the opposite corner. The motif fills each panel, so it repeats panel by panel along the wall.
How big is each panel and how many will I need?
Each panel is a 50 x 50cm square, and four panels cover one square metre, so measure your wall's area in square metres to work out how many you need.
How are the panels fixed to the wall?
Spread adhesive on the back of each panel and press it onto the wall, then fill the joins with filler and wipe them clean. No special equipment is needed.
Do the panels come with adhesive and filler?
No. The adhesive and the filler are bought on their own, so plan for both alongside the panels before you start fitting.
Can I cut the panels to fit my wall?
Yes, the panels can be cut to fit, so you can trim them neatly where the run of panels meets the edge of a wall.
How do I clean the panels?
The PVC is waterproof and low maintenance, so a wipe with a damp cloth is all that is needed to keep the white relief looking fresh.