Curved Faceted Star 3D PVC Wall Panels 50 x 50cm - White

Our Curved Faceted Star 3D wall panels bring a bold geometric pattern to a plain wall. Each white PVC panel is a 50 x 50cm square with a large faceted centre, about two thirds of the panel across, surrounded by four curved, pointed blades that reach into the corners, so every panel reads as one big four-pointed star. A narrow channel runs diagonally through the middle from the top-left corner to the bottom-right. The centre and blades are clearly raised, with crisp edges that hold soft shadows. When panels are joined, the curved edges meet across the seams to form a repeat of overlapping circles.

These panels are made for interior walls in homes, offices, hotels and shops. They suit a feature wall behind a bed or sofa, a reception desk or a shop counter, or anywhere a flat surface would benefit from pattern without adding colour. Because the facets are angled, light falling across the wall picks out each plane in a slightly different tone. The stars look sharper in side light from a window or wall light and calmer under even overhead lighting. Four panels cover one square metre, which makes it simple to work out how many your wall needs once you have measured it.

Each panel is formed from a 0.8mm sheet, and fitting needs no special equipment. Spread adhesive on the back of a panel, press it onto the wall, and cut panels to fit where the wall ends. Fill the joins with filler and wipe them clean so the pattern runs on across the seams. Adhesive and filler are sold separately. The material is waterproof and low maintenance, so a wipe with a damp cloth keeps each panel clean. Pair the stars with plain furniture and a natural texture such as oak or linen, so the pattern carries the room.

What does the Curved Faceted Star pattern look like?

Each panel has a large faceted centre ringed by four curved, pointed blades, giving one four-pointed star per square, with a narrow diagonal channel crossing the middle.

How big is each panel and how many will I need?

Each panel measures 50 x 50cm. Four of them cover one square metre, so measure your wall in square metres and allow four panels for each one.

How are the panels fixed to the wall?

You spread adhesive across the back of each panel and press it into place on the wall. No special tools or equipment are required for the job.

Do I need to buy anything else to fit them?

Yes. You will need to buy adhesive to fix the panels and filler for the joins, because neither comes with the panels.

Can the panels be cut to fit?

Yes. They can be cut to fit around the edges of a wall, and the joins between panels are then filled and wiped clean so the pattern carries on.

Where can I use these 3D wall panels?

They are designed for interior walls in homes, offices, hotels and shops, and they work especially well as a feature wall in a living room or reception area.