Description
The Cuadrax is a 2 light wall fitting with an antique brass horizontal bar and backplate supporting two clear optical glass cube shades, each housing a G9 bulb socket (bulbs sold separately). An integrated rocker switch on the backplate allows the light to be controlled independently of the room circuit, useful for bedside positions, reading corners and hallway zones where localised switching is needed.
Designed for bathroom mirrors, bedroom walls flanking a headboard, and corridor runs where multiple fittings create balanced illumination, the Cuadrax projects 135mm from the wall and spans 240mm wide across the two shades. The glass cubes feature a polished square outer profile with a cylindrical hollow inside, so each shade presents structured facets when unlit and layered prismatic reflections when lit. The antique brass finish has a brushed, slightly oxidised tone that pairs with traditional oak furniture, warm neutral walls and transitional interiors mixing contemporary forms with warmer metals.
The integrated switch eliminates the need for a dedicated wall switch plate in bedside and reading nook installations, giving cleaner wall surfaces and more control over where the fitting is positioned relative to furniture. The fitting is dimmable when paired with dimmable G9 LED or halogen bulbs, allowing brightness to be adjusted via a compatible dimmer on the lighting circuit. The 1.1kg weight and 240mm width suit plasterboard walls with standard cavity fixings.
Specification
| Colour Finish 1 |
Antique Brass |
| Shade Colour |
Clear |
| Width |
240mm |
| Height |
140mm |
| Projection |
135mm |
| Number Of Bulbs |
2 |
| Lamp Socket |
G9 |
| Power Consumption |
Dependent On Lamps Used |
| Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Weight |
1.1KG |
| Warranty |
1 Year |
Frequently Asked
What bulbs does it take?
The Cuadrax takes two G9 capsule bulbs (sold separately). Most users pair it with 2.5W-4W LED G9 bulbs in warm white (2700K-3000K) for bathroom mirrors and bedside positions. Maximum wattage depends on the bulb rating — check the bulb packaging.
Is it dimmable?
Yes, when fitted with dimmable G9 bulbs and connected to a compatible dimmer switch on the lighting circuit. The integrated rocker switch on the fitting itself is an on/off control only, not a dimmer.
Can it be used in bathrooms?
The fitting does not carry an IP rating in the specification table, which typically means it is not rated for bathroom zones requiring splash or moisture protection. For bathroom use, confirm suitability with the manufacturer or install it outside designated wet zones (typically zone 0, 1, 2).
What does the integrated switch control?
The rocker switch on the backplate turns both bulbs on and off together, independently of the wall circuit switch. This is useful for bedside installations where you want localised control without reaching for a wall switch.