Description
The Creek is a 170mm round outdoor wall light with a 15W integrated LED housed behind a white polycarbonate circular faceplate. The LED is CCT switchable, allowing you to select between 2700K extra warm white, 3300K warm white, or 4000K cool white via a small switch on the fitting before installation. The 120° beam angle spreads light evenly across the wall surface and outward, delivering 1000 lumens at 15W.
Designed for exterior walls, entrances, garden facades and pathway lighting where both function and a clean aesthetic are needed, the Creek sits 100mm proud of the wall and projects light forward and to the sides. The IP65 rating protects against rain and dust ingress, making it suitable for fully exposed external positions including coastal areas with occasional heavy rain. The white finish pairs with rendered walls, painted brick, timber cladding and modern composite facades.
The polycarbonate diffuser is impact-resistant and lighter than glass, reducing stress on the wall fixing points while maintaining light transmission. The circular form softens the hard lines of rectangular architecture and provides visual interest on blank wall sections between windows or at the corners of garden buildings. The fitting mounts directly onto a standard exterior back box and connects to mains power — no separate driver box is required as the LED driver is integrated within the body.
Specification
| Colour Finish 1 |
White |
| Diameter |
170mm |
| Projection |
100mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
2700/3300/4000K Extra Warm/Warm/Cool White |
| Beam Angle |
120° |
| Lumen |
1000lm |
| Power Consumption |
15W |
| Voltage |
AC220-240V 50/60Hz |
| Dimmable |
No |
| IP Rating |
IP65 |
| Weight |
0.45KG |
| Warranty |
3 Year |
Frequently Asked
How do I change the colour temperature?
The CCT switch is on the fitting itself, accessed before installation. You select between 2700K, 3300K, or 4000K by toggling a small switch. Once the light is installed and powered, the colour temperature is fixed until you remove the fitting and change the switch position again.
Is it suitable for coastal locations?
The IP65 rating protects against rain and dust, making it suitable for most exterior positions including coastal areas. However, direct salt spray exposure over time may affect the white finish. Regular rinsing with fresh water helps extend the finish lifespan in high-salt environments.
Can it be mounted on a brick wall?
Yes. The Creek mounts onto a standard exterior back box fixed to the wall. On brick or masonry walls, use appropriate wall plugs and fixings rated for outdoor use. The 0.45kg weight is light enough for most wall types when properly anchored.
What spread of light does it give?
The 120° beam angle spreads light across approximately 2-2.5m of wall width when mounted at typical entrance height (1.8-2m from ground level). It provides both upward and downward wash, with stronger forward projection due to the 100mm wall offset.