Description
Small, quietly proportioned and easy to place, this is a two lamp wall light that pairs smoke glass with a satin black finish. The tinted glass takes the edge off the G9 capsules behind it, so what reaches the room is a soft glow rather than a hard bright point you end up looking away from. It measures 19cm across and stays close to the wall, which makes it useful in a hallway or beside a bed where anything deeper would catch a shoulder.
We reach for this one in pairs: either side of a bed, flanking a mirror on a landing, or spaced along a corridor that wants light at eye level rather than overhead. There is no switch on the body, so it runs from the wall switch or from a dimmer circuit, and you will need dimmable capsules if you want to bring the level down, the dimmer itself being a separate purchase. Rated for dry indoor rooms, it belongs in bedrooms, sitting rooms and halls rather than shower rooms or anywhere it might be splashed.
The shades are glass, given a smoke tint that darkens the tone without hiding the lamp inside, and the finish is a satin black, low in sheen and forgiving of dust. Construction is double insulated. When it comes to cleaning, wait until the glass is cold, then wipe with a barely damp cloth and dry it off at once; smoke glass shows fingerprints readily and much prefers a light touch to any spray cleaner. It carries a one year warranty. We stock the same wall light in satin brass and satin nickel, and there is a flush ceiling fitting in the range if you want the smoke glass overhead as well. Lamps are not included.
Specification
| Colour |
Satin Black |
| Weight |
0.68KG |
| Width |
190mm |
| Height |
340mm |
| Projection |
140mm |
| Materials Used |
Iron, Glass |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
2 x G9 10W max (lamps not included) |
| Lamp Cap |
G9 |
| Recommended Lamp |
LED (Capsule G9) |
| Light Distribution |
Ambient |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Smoke |
| Base Dimensions (mm) |
D:100mm H:25mm |
| Cup Dimensions (mm) |
D:35mm H:17mm |
| Bracket Dimensions (mm) |
L:95mm W:20mm H:15mm |
| Glass Dimensions (mm) |
D:70mm H:75mm |
| Shade Material |
Glass |
| Shade Shape |
Cone |
| Shade Included |
Yes |
| Number of Shades |
2 |
| Pieces Included |
1 |
| Unassembled |
Yes-Glass To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamps does it take?
Two G9 capsules, up to 10W each. We would choose LED capsules, and dimmable ones if the circuit has a dimmer on it.
How far does it stand off the wall?
The projection is 140mm, with a height of 340mm and a width of 190mm, so it reads as a compact fitting on a narrow stretch of wall.
Can I dim it?
Yes, with dimmable G9 capsules and a suitable dimmer. Neither the lamps nor a dimmer are supplied.
Is there a switch on the fitting?
No, it is unswitched and works from the wall switch or circuit that feeds it.
Can it go in a bathroom?
No. It is IP20, so keep it to dry rooms away from splashing.
How do I clean the smoke glass?
Turn the light off and let the glass cool, then use a barely damp cloth and dry immediately. Avoid spray cleaners and abrasives.