Coniston Tall 6 Light Crystal Wall Light - French Gold IP44

The Coniston Tall is a 6-light crystal wall light built around a vertical cascade of clear cut crystal droplets arranged in overlapping tiers on a French gold frame. Six G9 bulb fittings sit within the crystal layers, each rated for up to 10W (bulbs sold separately). The IP44 rating allows safe use in bathroom zones 2 and 3, where the fitting may be exposed to splashes and humid air.

Designed for large bathroom walls where a single fixture needs to provide both ambient light and decorative presence, the Coniston Tall measures 310mm wide by 390mm tall with a 180mm projection from the wall. This scale suits walls flanking a mirror, alcoves above a freestanding bath, or feature walls in dressing rooms and walk-in wardrobes. The six bulbs provide enough output for task lighting around a vanity when fitted with 6-8W G9 LEDs, or softer ambient wash when paired with lower-wattage bulbs.

The French gold finish on the metal frame carries a warm brass tone with a subtle antique patina, sitting between polished brass and aged brass in colour depth. Each crystal droplet is facet-cut to refract light in multiple directions, creating patterns on surrounding tiles and walls when the fitting is lit. The layered construction gives the Coniston a stacked, tiered appearance that reads as more traditional than modern geometric crystal fittings. At 4.6kg the fitting requires secure fixing into a solid wall or stud backing.

Can this be used in a bathroom?

Yes. The IP44 rating makes the Coniston suitable for bathroom zones 2 and 3, where it may be exposed to splashes and humid air. It should not be installed directly above a bath or shower (zone 1) or within the shower enclosure itself (zone 0).

What bulbs does it take?

The Coniston takes six G9 capsule bulbs, each up to 10W maximum. G9 LED bulbs between 3-6W are typically sufficient for ambient bathroom lighting, while 6-10W bulbs provide brighter task lighting around a mirror. Bulbs are sold separately.

Is it dimmable?

Yes, if paired with dimmable G9 bulbs and a compatible dimmer switch. The fitting itself does not restrict dimming, but standard non-dimmable LED bulbs will flicker or fail if used with a dimmer.

How is it mounted?

The fitting weighs 4.6kg and requires secure fixing into a solid wall using appropriate fixings for the wall type. The backplate mounts flush to the wall and the cable entry point sits behind the plate, so surface-mounted conduit or trunking is not needed if the cable is chased into the wall.