Coniston 4 Light Crystal Wall Light - Polished Chrome

The Coniston is a 4-light crystal wall light built on a polished chrome frame with cascading tiers of faceted crystal droplets arranged in a waterfall formation. The fixture measures 300mm wide by 400mm high, with a 190mm projection from the wall, and takes four E14 bulbs (sold separately) mounted behind the crystal tiers to light the arrangement from within.

Designed for dining rooms, entrance halls and reception spaces where vertical wall presence is needed, the Coniston provides both decorative impact and functional illumination. The four-bulb configuration lights the crystal tiers from multiple angles, creating refraction and sparkle across the faceted surfaces. The polished chrome frame holds the structure without dominating the visual — the crystal remains the primary feature when lit and when unlit.

Each tier holds multiple clear crystal pieces cut with flat facets that catch and redirect light. The polished chrome finish provides a cool metallic backdrop that amplifies the transparency of the crystal and creates tonal contrast between the metal frame and the crystal droplets. The complete assembly weighs 4.5kg, requiring secure wall fixings into masonry or studwork capable of carrying that load plus the weight of the bulbs.

What bulbs does the Coniston take?

The fixture takes four E14 (small Edison screw) bulbs up to 20W each. Bulbs are sold separately. Most users pair this with warm-white LED candle bulbs between 4-6W and 2700K-3000K to balance sparkle with ambient warmth.

Is the Coniston dimmable?

Yes, provided you use dimmable bulbs. The fixture itself has no electronics that would prevent dimming — dimmer compatibility depends entirely on the bulbs you choose and the dimmer switch installed on the circuit.

What wall fixing is needed?

At 4.5kg loaded weight the Coniston requires secure fixings into solid masonry or studwork. Use wall plugs rated for 10-15kg minimum when fixing into brick or block, or fix directly into timber studwork with woodscrews. Plasterboard-only fixings are not suitable.

How is the crystal cleaned?

Switch off and allow bulbs to cool completely. Wipe each crystal piece individually with a dry microfibre cloth. For stubborn marks, a barely-damp cloth with distilled water is acceptable, but avoid soaking the crystal or allowing water to run into the electrical fittings. Do not use household sprays or chemical cleaners.