Coin Small Round CCT LED Flush Ceiling Light With Remote Control - Black

The Coin is a 380mm flush ceiling light built around a black metal ring enclosing a white acrylic diffuser, with an integrated 56W LED that delivers 2500 lumens across a 120° beam angle. The colour temperature is adjustable from 2700K warm white through to 5000K cool white via the included remote control, allowing the light output to be tuned for different times of day or activities without changing the physical bulb.

Designed for rooms with low ceilings (under 2.4m) where a pendant or semi-flush would hang too low, the Coin's 70mm height sits almost flat against the ceiling while still providing enough general illumination for a 12-15m² room such as a bedroom, hallway, bathroom or small kitchen. The flush mount avoids head clearance issues in lofts, basements and bungalows where ceiling height is restricted. The remote control dims the output and switches between warm and cool white modes without needing a compatible wall dimmer.

The black powder-coated metal outer ring creates a defined circular frame around the central diffuser, adding visual weight and making the fitting more visible against white ceilings than an all-white flush light would be. The acrylic diffuser spreads the LED evenly across the 380mm diameter without visible hotspots, so the fitting acts as a single large light source rather than showing individual diode points. The combined 0.9kg weight mounts directly to a standard UK ceiling rose with no additional support required.

How is the colour temperature changed?

The included remote control allows you to switch the LED between 2700K warm white, neutral white and 5000K cool white, and also dims the light output. The remote pairs with the fitting on installation and does not require a compatible wall dimmer.

What size room does it suit?

The 2500 lumen output and 120° beam angle provide general illumination for a room of approximately 12-15m² (a typical small bedroom, bathroom or hallway). For larger rooms or higher light levels, multiple fittings or a higher-output model would be more appropriate.

What ceiling height is needed?

The Coin is designed for low ceilings where head clearance is limited. The 70mm height projects minimally from the ceiling, making it suitable for rooms under 2.4m where a pendant or semi-flush fitting would hang too low.

Can it be used in bathrooms?

The specification table does not list an IP rating, so the Coin is not rated for use in bathroom zones where splashing or direct water contact is possible. Contact us if you need confirmation of suitability for a specific bathroom location.