Description
Our Coffered Squares and Circle 3D wall panels bring a coffered look to a plain wall. Each panel holds four square coffers in a two-by-two grid, every one edged with stepped mouldings, set around a central circle of concentric rings that cut into the squares' inner corners. A stepped border runs round the edge, so the motif appears once per panel, and panels laid side by side build a grid of squares and circles. The relief is 25mm deep, enough for the frames and rings to read clearly, with clean shadow lines between each step. Each panel is a 50 x 50cm square in white PVC.
They are made for interior walls in homes, offices, hotels and shops. The pattern suits a feature wall behind a bed or sofa, along a hallway or in a reception area, because its geometry is calm and orderly rather than busy. It is a geometric design with a traditional, panelled feel, so it sits as comfortably in a period room as in a clean modern one. With a lamp or window to one side, the stepped frames catch shadow and the rings stand out, while flat, even light softens the wall to a quiet, textured white.
Fitting needs no special equipment. Spread adhesive on the back of each panel, press it onto the wall and cut panels to fit, then fill the joins with filler and wipe them clean so the grid runs on unbroken. Adhesive and filler are sold separately. Four panels cover one square metre, which makes it simple to work out how many your wall needs. The sheet is 0.8mm thick. PVC is waterproof and low maintenance, and a wipe with a damp cloth keeps the white fresh. For the neatest finish, start at the centre of the wall and work outwards, so the circles line up evenly and any cut panels sit at the edges.
Specification
| Pattern |
Coffered Squares and Circle |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
25mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Coffered Squares and Circle pattern look like?
Four square coffers edged with stepped mouldings sit in a two-by-two grid around a central circle of concentric rings, all inside a stepped border, so panels side by side form a grid of squares and circles.
How big is each panel and how much wall does it cover?
Each panel is a 50cm square, and four of them cover one square metre, so measure your wall in square metres to work out how many you need.
How do I fit these 3D wall panels?
Spread adhesive over the back of each panel and press it onto the wall, cutting panels to fit as you go, then fill the joins with filler and wipe them clean. No special equipment is needed.
What else do I need to buy before fitting?
You will need both adhesive and filler, which you buy separately from the panels, so it is worth having them ready before you start on the wall.
Where can I use the panels?
They are designed for interior walls in homes, offices, hotels and shops, and work especially well on a feature wall where side light picks out the relief.
How do I clean the panels?
PVC is waterproof and low maintenance, so a wipe with a damp cloth is all the white surface needs to keep it looking its best.