Description
Five lamp holders spread along a slender black frame, so the light arrives as a soft row rather than a single point. The E27 sockets are made for tubular T45 LED lamps, and that is what we would fit: the long slim glass suits the plain rustic frame and keeps the whole piece light on the eye. An inline switch sits on the flex, which puts control within easy reach on a table top, and the lamp will dim if you pair the right lamps with a dimmer.
Standing 64cm tall and stretching wide across its base, this is furniture-scale lighting rather than something for a bedside table. We would set it on a long sideboard, a hall console or a broad window ledge where it has room to spread, and it earns its place in rooms with exposed timber, brick or quiet painted walls. It suits anyone after a warmer, more workshop-like look than a shaded lamp gives, and because the lamps are on show, your choice of glass does as much for the effect as the frame does.
Black runs across the frame, the holders and the flex, so nothing interrupts the outline. The fitting is earthed, and it is intended for dry rooms indoors on a normal household supply. Keeping it looking right takes very little: with the power off and the glass cold, run a dry cloth over the arms and holders to lift dust, and avoid sprays near the lamp caps. It carries a one year warranty. We also stock the same design as a pendant and as a wall lamp, both finished in black, which makes it easy to run one look through a hall and into the room beyond. Lamps are not included, so choose yours to match the tone you want.
Specification
| Colour |
Black |
| Ceiling Mountable |
Yes |
| Weight |
2.90KG |
| Length |
470mm |
| Width |
230mm |
| Height |
640mm |
| Materials Used |
Iron |
| Adjustable Height |
No |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
5 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (Tubular T45) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
100-240V~50/60Hz |
| Switch |
Yes - Inline Switch |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Plug-in Item |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Unplug the lamp before cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamps does it take?
Five E27 lamps, up to 20W each. Tubular T45 LED lamps are the recommended choice and show off the design best.
Can it be dimmed?
Yes, provided you fit dimmable lamps and use a compatible dimmer. Standard non-dimmable LEDs will not respond.
How big is it?
It measures 640mm high, 470mm long and 230mm deep, and weighs 2.9kg.
How is it switched?
There is an inline switch on the flex, so you can operate it from the table top without reaching for a wall switch.
How should I clean it?
Switch off at the socket and let the lamps go cold, then wipe the frame and holders with a dry, soft cloth. No polishes or solvents.
Is the same design available in other fittings?
Yes. We stock a matching pendant and a matching wall lamp, both in black.