Description
Clara puts two lights on one backplate: a full-size E27 lamp holder for a shade of your choosing, and a small integral LED reading light set below it. A dual rocker switch on the body works each one separately, so the main light can be off while the reading light stays on. The reading light throws around 270 lumens of warm white, enough to read by without waking whoever is beside you, and a USB-C socket sits alongside for charging a phone overnight.
We reach for this one either side of a bed where the table is too small for a lamp, or in a guest room where a single fitting needs to do the work of two. It suits a reading chair in a quiet corner just as well. The E27 holder accepts a lamp of up to 20W, with the right choice depending on the shade you pair with it, and at 17cm wide the fitting stays modest against a headboard.
The antique brass finish has the warmer, slightly softened tone of aged metalwork, and sits happily with linen shades, walnut and painted timber. It is double insulated, and meant for dry rooms indoors rather than bathrooms or anywhere open to the weather. Keep it looking well by dusting with a dry microfibre cloth and leaving polishes and sprays alone, since they will lift the aged tone. We stock the same fitting in brass gold, satin black, polished chrome, matt bronze and satin nickel, and there is a frame-only version if you want the switched wall lamp without the reading light or the USB socket. It carries a three year warranty. The E27 lamp and shade are not included.
Specification
| Colour |
Antique Brass |
| Wall Mountable |
Yes |
| Weight |
0.80KG |
| Width |
170mm |
| Height |
170mm-230mm |
| Projection |
150mm |
| Materials Used |
Iron, Aluminium |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
1 x E27 20W max + 1 x 3W integrated LED (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED Lamp Dependant On Shade |
| Colour Temperature |
3000K Warm White (±5%) |
| Lamp 2 Socket |
Integral LED |
| Recommended Lamp 2 |
Integral LED |
| Max Wattage Lamp 2 (W) |
3W |
| Lamp 2 Included |
Yes - Integrated |
| No. of Switching Cycles |
100000 |
| Average Life of LED (hrs) |
30000hrs |
| LED Brand |
CREE |
| Qty of SMD |
1 |
| SMD Chipset |
5050 |
| LED Power (W) |
3W (±5%) |
| LED Voltage (V) |
10V (±5%) |
| Type of LED |
CREE |
| Lumens Per LED |
270lm |
| Lumens Per Watt (lm/W) |
90lm (±5%) |
| Beam Angle (°) |
120° |
| System Flux (lm) |
270lm (±5%) |
| CRI |
>80 |
| Light Distribution |
Multiple Directions |
| Driver Included |
Yes |
| Type of Driver |
Eaglerise: LS-3-700 SB |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~ 50/60Hz |
| Switch |
Yes - Dual Rocker Switch |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life (hrs) |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Shade Included |
No |
| Number of Shades |
1 |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamp should I fit to the E27 holder?
An LED lamp of up to 20W. The best shape depends on the shade you choose, so a globe, golfball or classic GLS can all work depending on how much of the lamp shows.
Can the two lights be used independently?
Yes. A dual rocker switch on the fitting controls the E27 lamp and the reading light separately, so you can use either alone or both together.
Is it dimmable?
No, it is not dimmable, so it is best paired with a standard switched circuit rather than a dimmer.
How bright is the reading light, and what colour is it?
The integral LED draws 3W and gives 270lm at 3000K warm white, with a rated life of 30,000 hours.
What are the dimensions?
It measures 170mm wide with a 150mm projection from the wall, and the height adjusts between 170mm and 230mm.
How should I look after the antique brass?
Wipe it now and then with a dry soft cloth. Avoid metal polish, creams and household sprays, which can strip the aged surface and leave it patchy.