Free Delivery on all orders over £99*
Save 9%

Citronic XF-XM300RD Balanced XLR Microphone Lead 3m Red

£499
RRP £549
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This Citronic microphone lead runs 3.0 metres from a female XLR to a male XLR, so it slots straight into standard microphone and audio setups. It carries balanced signals, which keeps interference and noise down over longer cable runs. The pin-out follows the usual balanced wiring: pin 1 ground, pin 2 hot and pin 3 cold. The cable is fully shielded, which is a big part of why it stays clean and reliable when you're working on stage or in the studio.

The build uses pure copper conductors, with 20 strands at 0.08mm each, sitting inside a 6mm cable. There's cotton reinforcement running through it and a soft-grip, rubberised jacket that resists tangling, so it coils up and packs away without fuss. Connections are machine-soldered for consistency, and the connectors themselves are professional die-cast XLRs with a locking latch on the female end to hold the plug in place. In the US you'll see leads like this called cords or cables, but it's the same thing.

Red makes it easy to colour-code your rig, whether that's marking a particular mic, monitor feed or input channel. At 3 metres it gives you enough reach for most vocal and instrument positions without leaving too much slack on the floor. If you run several microphones, having a set in different colours saves a lot of guesswork during setup and teardown. This is a straightforward, well-made lead built to hold up to regular use.

Specification
Length 3.0m
Colour Red
Cable : diameter 6mmØ
Conductors 20 x 0.08mmØ
Connectors Male XLR, Female XLR
Pin-out Balanced: 1-Ground, 2-Hot, 3-Cold
Frequently Asked

What length is this microphone lead?

It measures 3.0 metres from the female XLR to the male XLR connector.

Is the cable balanced?

Yes. It carries balanced signals with the standard pin-out: pin 1 ground, pin 2 hot and pin 3 cold, which helps reject noise over the run.

What connectors does it use?

It has professional die-cast XLR connectors, male on one end and female on the other, with a locking latch on the female connector.

What are the conductors made from?

Pure copper, with 20 strands at 0.08mm each, plus cotton reinforcement inside a 6mm rubberised jacket.

Can I use this to connect microphones and other audio gear?

Yes. It suits microphones and general balanced audio connections between equipment fitted with XLR sockets.

Does the red colour serve a purpose?

It helps you colour-code your setup, so you can quickly identify a specific mic, channel or feed when patching and packing down.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This Citronic microphone lead runs 3.0 metres from a female XLR to a male XLR, so it slots straight into standard microphone and audio setups. It carries balanced signals, which keeps interference and noise down over longer cable runs. The pin-out follows the usual balanced wiring: pin 1 ground, pin 2 hot and pin 3 cold. The cable is fully shielded, which is a big part of why it stays clean and reliable when you're working on stage or in the studio.

    The build uses pure copper conductors, with 20 strands at 0.08mm each, sitting inside a 6mm cable. There's cotton reinforcement running through it and a soft-grip, rubberised jacket that resists tangling, so it coils up and packs away without fuss. Connections are machine-soldered for consistency, and the connectors themselves are professional die-cast XLRs with a locking latch on the female end to hold the plug in place. In the US you'll see leads like this called cords or cables, but it's the same thing.

    Red makes it easy to colour-code your rig, whether that's marking a particular mic, monitor feed or input channel. At 3 metres it gives you enough reach for most vocal and instrument positions without leaving too much slack on the floor. If you run several microphones, having a set in different colours saves a lot of guesswork during setup and teardown. This is a straightforward, well-made lead built to hold up to regular use.

    Specification
    Length 3.0m
    Colour Red
    Cable : diameter 6mmØ
    Conductors 20 x 0.08mmØ
    Connectors Male XLR, Female XLR
    Pin-out Balanced: 1-Ground, 2-Hot, 3-Cold
    Frequently Asked

    What length is this microphone lead?

    It measures 3.0 metres from the female XLR to the male XLR connector.

    Is the cable balanced?

    Yes. It carries balanced signals with the standard pin-out: pin 1 ground, pin 2 hot and pin 3 cold, which helps reject noise over the run.

    What connectors does it use?

    It has professional die-cast XLR connectors, male on one end and female on the other, with a locking latch on the female connector.

    What are the conductors made from?

    Pure copper, with 20 strands at 0.08mm each, plus cotton reinforcement inside a 6mm rubberised jacket.

    Can I use this to connect microphones and other audio gear?

    Yes. It suits microphones and general balanced audio connections between equipment fitted with XLR sockets.

    Does the red colour serve a purpose?

    It helps you colour-code your setup, so you can quickly identify a specific mic, channel or feed when patching and packing down.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.