Description
We built the Citronic XF-S6J600 as a durable, shielded audio lead for everyday studio and stage use. It runs from a female XLR connector to a 6.3mm stereo TRS jack plug, both die-cast for a reliable, long-lasting fit. The cable measures 6 metres, giving you room to route it around a desk or across a small stage without pulling tight.
Inside the 6mm jacket you'll find 15-strand 0.1mm pure copper conductors with cotton reinforcement, which helps the cable hold up to repeated coiling and knocks. The soft-grip, rubberised outer resists tangles and sits comfortably in the hand. Connections are machine-soldered for consistent contact, and the shielding keeps interference down so your signal stays clean. Note that a 6.3mm jack is also called a 1/4-inch jack, and both terms describe the same plug here.
This lead suits connecting a mixer output to an amp input, running a balanced source into a jack input, or linking gear where you need an XLR-to-jack conversion in one run. The pure copper conductors carry the signal accurately, and the balanced TRS design helps reject noise over the full length. It's a straightforward, well-made cable you can rely on for regular use, whether you're setting up at home, in a rehearsal room, or out at a gig.
Specification
| Length |
6.0m |
| Cable : diameter |
6mmØ |
| Conductor |
15 strand 0.1mmØ pure copper |
| Connectors |
Female XLR, 6.3mm TRS jack plug |
Frequently Asked
What connectors does this lead have?
A female XLR connector on one end and a 6.3mm stereo TRS jack plug on the other, both die-cast for durability.
How long is the cable?
The cable is 6 metres long, suitable for desk routing or short stage runs.
Is the jack a mono or stereo type?
It is a TRS (tip-ring-sleeve) stereo jack, which also supports balanced mono connections.
What is the cable made from?
It uses 15-strand 0.1mm pure copper conductors with cotton reinforcement inside a 6mm rubberised jacket.
Is a 6.3mm jack the same as a 1/4-inch jack?
Yes, 6.3mm and 1/4-inch describe the same plug size; both terms are used interchangeably.
Is this lead shielded against interference?
Yes, it is shielded and uses a balanced TRS design to help reject noise over the cable's length.