Description
This Citronic audio lead carries a balanced or stereo signal over 6.3mm (quarter-inch) TRS jack plugs, with one straight plug and one right-angled plug at 90 degrees. The 3.0m length suits connecting mixers, active speakers, keyboards and other line-level gear where a low profile connection at one end helps keep things tidy. The die-cast plug bodies are built for regular use rather than occasional home setups.
The cable uses 15 strand 0.1mm diameter pure copper conductors with cotton reinforcement for strength, all wrapped in a soft-grip, anti-tangle rubberised jacket measuring 6mm across. Shielding helps reject interference, and the machine-soldered connections give consistent, reliable joints. Together these keep the signal clean and the lead flexible enough to coil and store without kinking.
The right-angled plug sits flush against equipment, which reduces strain and stops the connector sticking out where it might get knocked. The straight plug goes to the source or destination as needed. Because both plugs are TRS, the lead handles balanced mono runs as well as stereo signals, so it works across a wide range of studio and stage jobs. If you need a dependable quarter-inch lead that stands up to being packed, moved and used often, this is a solid choice.
Specification
| Length |
3.0m |
| Conductor |
15 strand 0.1mmØ pure copper |
| Cable : diameter |
6mm |
| Connectors |
6.3mm TRS jack plug, 90° 6.3mm TRS jack plug |
Frequently Asked
Is this a balanced or stereo lead?
Both. The TRS (tip-ring-sleeve) plugs carry either a balanced mono signal or a stereo signal, so you can use it for either job.
What does the right-angled plug do?
The 90 degree plug sits flush against your gear, saving space and reducing strain on the connection compared with a straight plug.
What size are the jack plugs?
Both plugs are 6.3mm, also known as quarter-inch, TRS jack plugs.
How long is the lead?
The cable is 3.0m long.
What is the cable made of?
It uses 15 strand 0.1mm diameter pure copper conductors with cotton reinforcement, inside a 6mm rubberised, anti-tangle jacket with shielding.
Will it work with mixers and active speakers?
Yes. It suits line-level connections between mixers, active speakers, keyboards and similar equipment.