Description
This Citronic audio lead connects a 6.3mm stereo TRS jack plug to a 3.5mm stereo TRS jack plug over a 1.5m length. Both plugs are die-cast for a solid feel, and the connections are machine-soldered for consistent, reliable contact. The lead carries a balanced or stereo signal, making it a practical link between kit that uses the larger quarter-inch (6.3mm) socket and gear fitted with the smaller mini jack (3.5mm).
Inside the 6mm cable sit two conductors of 20-strand, 0.1mm pure copper, giving good conductivity and a bit of flex without stress on the wires. The cable is shielded to help keep interference out of the signal, and cotton reinforcement adds strength along its run. A soft-grip, rubberised jacket is designed to resist tangling, so the lead stays tidy when you coil it or move between setups.
Use it to join a mixer, audio interface or headphone amp to a phone, tablet, laptop or a set of headphones, wherever the plug types match. The 1.5m length suits desktop and studio work where you want enough reach without excess cable to manage. As always, check that both ends of your equipment take stereo TRS jacks before ordering so the wiring lines up with what you're connecting.
Specification
| Length |
1.5m |
| Cable : diameter |
6mmØ |
| Conductors |
2 x 20 strand, 0.1mmØ pure copper |
| Connectors |
3.5mm stereo (TRS) jack plug, 6.3mm stereo (TRS) jack plug |
Frequently Asked
What does this lead connect?
It links a 6.3mm stereo TRS jack plug to a 3.5mm stereo TRS jack plug, so you can join quarter-inch and mini jack equipment.
How long is the cable?
The lead is 1.5m long, which suits desktop and studio use where you want reach without excess cable.
Is it a stereo or balanced lead?
Both plugs are TRS (tip-ring-sleeve), so the lead can carry a stereo signal or a balanced mono signal, depending on your equipment.
What is the cable made of?
It uses two 20-strand, 0.1mm pure copper conductors in a 6mm shielded cable with cotton reinforcement and a rubberised jacket.
Does the shielding reduce interference?
The cable is shielded to help keep unwanted interference out of the signal during use.
Are the plugs hard-wearing?
The 3.5mm and 6.3mm plugs are die-cast with machine-soldered connections for a solid, reliable link.