Description
The Citronic CASA-10 is a passive PA cabinet built around a 10" full-range driver, handling 200W RMS at 8 ohms. It uses custom high-efficiency drivers loaded into a compact moulded housing, giving you a workable amount of output from a box that stays easy to move and set up. As a passive design, it runs from a separate amplifier rather than having power built in, which keeps the cabinet itself light and simple to position.
The enclosure is a high-impact moulded cabinet with two side handles and a top carrying handle, so you can lift and carry it however suits the job. An integral 35mm pole-mount socket lets you fit the cabinet on a speaker stand or on top of a matching sub, keeping the sound projected out towards the audience. Connection is handled by two SPK sockets (Speakon-type), so you can loop through to a second cabinet from a single amplifier channel.
The CASA-10 works well for smaller live sound, mobile setups and general sound reinforcement where you need clear, full-range output without a lot of bulk. It pairs with the CASA series sub cabinets when you want more low-end weight for busier events. Because it is passive, you have the freedom to match it to whatever amplifier you already own, provided the amp suits an 8 ohm load and the 200W RMS rating.
Specification
| Weight |
9.70KG |
| Dimensions |
500mm x 310mm x 260mm |
| Frequency response |
55Hz - 19kHz |
| SPL max. |
121.0dB |
| Sensitivity |
95dB |
| Power handling : max |
400W |
| Power handling : rms |
200W |
| HF driver |
25mmØ (1") Ti compression driver |
| Voice coil |
50mmØ (2") |
| Main driver |
250mmØ (10") |
| Impedance |
8 Ohm |
| Connection |
2 x SPK socket |
Frequently Asked
Is the CASA-10 active or passive?
It is a passive cabinet, so it needs a separate power amplifier. It does not have any amplification built in.
What power and impedance does it run at?
It handles 200W RMS at 8 ohms. Match it to an amplifier that suits an 8 ohm load at that power level.
Can I mount it on a stand?
Yes. It has an integral 35mm pole-mount socket, so it fits standard speaker stands or the top of a matching sub cabinet.
What connections does it use?
It has two SPK sockets (Speakon-type), letting you link a second cabinet from one amplifier channel.
Can I add more bass?
Yes. The CASA-10 pairs with the CASA series sub cabinets when you want more low-end output for larger events.
How easy is it to carry?
The moulded cabinet has two side handles and a top carrying handle, so you can lift and move it in whatever way suits the setup.