Description
Our Citronic 2R-2R050 is a shielded twin audio lead fitted with die-cast RCA phono plugs at both ends, giving you a tidy stereo connection between mixers, amplifiers, media players and other line-level gear. RCA plugs are also known as phono plugs, and this 0.5m length suits short runs where you want to keep cable slack to a minimum. Two plugs at each end handle left and right channels, so you get a full stereo signal from a single lead.
The cable itself uses twinned high-grade construction with pure copper conductors, each side running 12 strands of 0.1mm copper for a solid, low-loss signal path. Cotton reinforcement adds strength inside the jacket, while the connections are machine-soldered for consistency. The soft-grip rubberised outer is anti-tangle and comfortable to route, and the die-cast plugs are built to hold up to repeated plugging and unplugging in studio, DJ and home setups.
With a twin 5mm diameter cable and screening throughout, this lead keeps interference down and delivers clean, reliable audio between components. It is a straightforward choice when you need a dependable RCA to RCA link that will last, whether you are wiring a permanent install or carrying it as a spare in your gig bag. The short 0.5m run makes it ideal for stacked equipment and rack connections where longer cables just get in the way.
Specification
| Length |
0.5m |
| Cable : diameter |
Twin 5mmØ (5 x 10mm) |
| Conductors |
12 strand, 0.1mmØ pure copper |
| Connectors |
4 x RCA phono plug |
Frequently Asked
What does this lead connect?
It links two devices with RCA phono sockets, such as a mixer to an amplifier, a media player to a receiver, or similar line-level audio gear. It carries a stereo signal using two plugs at each end.
Is RCA the same as phono?
Yes. RCA plugs are commonly called phono plugs in the UK, and both terms refer to the same connector used here.
How long is the cable?
This version is 0.5m, which suits short runs between stacked or rack-mounted equipment.
What are the plugs made from?
The plugs are die-cast for durability, with machine-soldered connections for a consistent joint.
Is the cable shielded?
Yes, the lead is shielded to help reduce interference and keep the audio signal clean.
What conductors does it use?
Each conductor is made from 12 strands of 0.1mm pure copper, in a twin 5mm cable with cotton reinforcement.