Description
The shade here is a wine glass shape in smoke tinted glass, held on a slim antique brass arm with black detailing behind it. At 18cm across it is a small fitting, better suited to a pool of light beside a chair than to lighting a whole room. A toggle switch sits on the fitting itself, so it can be worked by hand rather than from the door. It takes an E27 lamp of up to 20W, and it will dim if you pair a dimmable lamp with a compatible dimmer.
We would use these in pairs, one either side of a bed, where the tinted glass softens the view of the lamp at reading height. They also work along a hallway, in an alcove, or flanking a mirror in a dressing area, and the small size means the fitting does not crowd a narrow space. Anywhere the glass and the warm metal can be seen close up suits it, since much of the appeal is in the shade. It is meant for dry rooms indoors, so keep it away from bathrooms and open porches.
Glass and metal throughout: the smoke shade carries the look, and the antique brass has that slightly dulled, warmed tone that sits well with older houses and darker paint. Tinted glass shows fingerprints, so we wipe ours with a dry lint free cloth once the lamp has gone cold, and keep polishes and sprays off the brass. It carries a one year warranty. The same wine glass shade runs through the rest of the range as a flush fitting, in smoke and other glasses with a choice of metal finishes, so wall and ceiling lights can be matched up in one room. Lamps are not included.
Specification
| Colour |
Antique Brass |
| Second Colour |
Black |
| Weight |
0.87KG |
| Width |
180mm |
| Height |
280mm |
| Projection |
280mm |
| Materials Used |
Iron, Glass |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60, Globe G80, ST64, Tubular T45) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Yes - Toggle Switch |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Smoke |
| Plate Dimensions (mm) |
D:100mm x H:25mm |
| Bracket Dimensions (mm) |
L:90mm x W:20mm x H: 5mm |
| Shade Shape |
Wine Glass |
| Shade Included |
Yes |
| Pieces Included |
1 |
| Unassembled |
Yes |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamp should I use?
One E27 lamp rated no higher than 20W. LED versions of the standard GLS pear shape, a small globe, a squirrel cage or a short tubular lamp all sit well in a wine glass shade.
Can it be dimmed?
Yes, provided you fit a dimmable lamp and a compatible dimmer. Neither the lamp nor a dimmer is supplied.
Does it have its own switch?
Yes, there is a toggle switch on the fitting, so it can be turned on and off where you are sitting.
How big is it?
The width is 180mm and the height 280mm, which keeps it neat beside a bed or in a hallway.
How do I clean the smoke glass?
Turn the light off and let the lamp cool completely, then use a dry lint free cloth. Avoid glass sprays and metal polish, which can mark the antique brass.
Is it suitable for a bathroom?
No. It is built for dry indoor rooms only, so choose a bathroom rated fitting for any zone near a bath or shower.