Description
Carlton is a compact switched wall light in antique gold, with a shallow backplate, a short upright stem and a lampholder ready for a shade of your choosing. At 11cm wide it holds close to the wall, which makes it useful in the spots where a broader fitting would feel crowded. A rocker switch sits on the body, so the light is controlled at the fitting rather than from across the room. It takes an E27 lamp of up to 20W. The shade and the lamp are not included; see our lamp shades.
We would put this beside a bed, one each side, where the switch to hand matters more than reach; it also earns its place on a narrow landing, in a hallway, or in a guest room where floor space is tight. Because the shade is yours to pick, the light it gives is yours to set too: a lined fabric shade for a soft pool of light, a glass one for something brighter. Dimming is possible where a dimmer and a suitable lamp are used together. Keep it to dry rooms indoors; it is not a fitting for a bathroom zone or a covered porch.
The antique gold reads warm and slightly aged rather than brightly plated, so it settles in with brass hardware, older timber and painted walls without shouting. Wipe it with a dry soft cloth when you dust, with the light switched off, and leave metal polishes and creams alone, since they can dull an aged finish. It carries a one year warranty. We stock it in this single finish, and we tend to suggest a small drum or a tapered shade so the proportions stay neat; neither shade nor lamp comes with it, so both are yours to choose.
Specification
| Colour |
Antique Gold |
| Weight |
0.35KG |
| Width |
110mm |
| Height |
195mm |
| Projection |
125mm |
| Materials Used |
Iron |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED Lamp Dependant On Shade |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Yes - Rocker Switch |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Base Dimensions |
D:100mm, H:20mm |
| Cup Dimensions |
D:52mm H:45mm |
| Plate Dimensions |
D:110mm, H:1.5mm |
| Shade Included |
No |
| Number of Shades |
1 |
| Pieces Included |
1 |
| Unassembled |
Yes-Shade To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Is a shade included?
No. The fitting is supplied without a shade, with an exposed E27 lampholder, so you can match a shade to the room. Small drum, tapered and glass shades all work well at this size. Choose one from our lamp shades.
What lamp does it take, and what is the maximum wattage?
One E27 lamp rated up to 20W. An LED capsule or golf ball lamp is the sensible choice, with the shade you fit guiding how much light you want from it.
Can it be dimmed?
Yes, provided you use a dimmable lamp with a compatible dimmer. No dimmer is supplied with the fitting.
How much wall space does it need?
It is 110mm wide and 195mm tall, with a projection of 125mm from the wall before any shade is added.
Is there a switch on the light itself?
Yes, a rocker switch on the body, so it can be operated at the fitting.
Is it suitable for a bathroom?
No. It is rated IP20 for dry indoor rooms only.