Description
This is a small wall light supplied without a shade, the E27 lampholder left open so you can choose your own. The finish is antique brass, warm and slightly darkened rather than bright, so it reads as an older piece against paint or paper. Proportions are modest, sitting close to the wall and taking up little visual room. It is not switched, so it runs from an existing wall switch or a dimmer, and lamps up to 20W suit it. The shade and the lamp are not included; see our lamp shades.
We reach for it in pairs either side of a bed, where a shade in linen or card softens the light for reading, and in hallways and small landings where a pendant would hang too low. It will dim with a compatible lamp and dimmer, which helps in bedrooms and snugs. Dry indoor rooms are its territory: living rooms, studies and hallways rather than bathrooms or anywhere it would meet damp air.
The antique brass covers the whole visible body, so the tone carries evenly across the fitting. Give it a soft dry cloth now and then and leave polishes and cream cleaners alone, since abrasives will cut through an aged finish. Let the lamp cool before you handle it or change a shade over it. It carries a one year warranty. We keep this one in antique brass and would pair it with a small pleated or coolie shade for a period room, fitting an LED lamp to suit whichever shade you settle on.
Specification
| Colour |
Antique Brass |
| Ceiling Mountable |
Yes |
| Weight |
0.35KG |
| Width |
110mm |
| Height |
195mm |
| Projection |
125mm |
| Materials Used |
Iron |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED Lamp Dependant On Shade |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Included |
No |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Is a shade included?
No, it is sold as a bare fitting with the lampholder exposed, so you choose a shade to sit on the E27 holder yourself. Choose one from our lamp shades.
Which lamp should I use?
An E27 lamp rated up to 20W, and an LED is the sensible choice. The right shape depends on the shade you pick, and no lamp is supplied.
Can it be dimmed?
Yes, with a dimmable lamp and a matching dimmer. The fitting itself has no switch on the body, so it is controlled from the wall.
What are the dimensions?
It is 110mm wide and 195mm tall, and projects 125mm from the wall, so it stays tight to the surface.
Can I use it in a bathroom?
No. It is rated IP20 for dry rooms, so keep it to bedrooms, hallways, studies and living spaces.
How should I clean the antique brass?
A soft dry cloth is all it needs. Skip metal polish and cream cleaners, as they will lift the darkened tone.