Description
The Capitol Hill is a 2-light wall light built around a circular natural brass backplate with twin curved arms extending outward and upward, each ending in a cylindrical candle sleeve fitted for an E14 bulb. The arms loop downward before rising to the lamp holders, creating a symmetrical profile that suits both traditional and transitional interiors.
Designed for hallways, dining rooms, bathrooms and bedrooms where decorative wall lighting is needed without excessive projection, the 156mm depth keeps the fitting close to the wall while the twin upward-facing lamps provide ambient illumination when paired with candle-style LED or filament bulbs. The natural brass finish works alongside warm-toned interiors, oak furniture, and warm white paint schemes. In bathrooms the fitting is suitable for Zone 3 only (no direct water contact).
The 270mm height and 247mm width scale the Capitol Hill for wall spaces between 30-50cm wide — typical alcoves either side of a chimney breast, above a hallway console, or flanking a bathroom mirror. The natural brass is unlacquered, so it will develop a patina over time unless periodically polished. The metal construction and circular backplate distribute weight across a broader area than single-point wall lights, reducing stress on the fixing points.
Specification
| Fitting Height |
270mm |
| Width |
247mm |
| Projection/Depth |
156mm |
| Maximum Wattage |
40W |
| Socket |
E14 |
| Bulb(s) Included |
No |
| Guarantee |
2 Year Guarantee |
Frequently Asked
What bulbs does the Capitol Hill take?
The fitting takes two E14 (small Edison screw) candle bulbs up to 40W each. Bulbs are sold separately. Most users pair this with 4-6W warm-white LED candle bulbs at 2700K for a softer ambient light.
Is the natural brass lacquered or will it tarnish?
Natural brass is typically unlacquered, meaning it will develop a darker patina over time as it oxidises. This can be slowed by periodic polishing with a brass cleaner, or left to age naturally for an antique appearance.
What wall spaces suit this fitting?
The 247mm width and 270mm height scale the Capitol Hill for wall spaces 30-50cm wide. Common placements include hallway alcoves, either side of a chimney breast, flanking bathroom mirrors, or above console tables in entrance halls.
Can it be used in bathrooms?
The fitting has no stated IP rating, so it is suitable for bathroom Zone 3 only — areas more than 60cm from a water source with no direct spray or splashing. Do not install directly above a basin or within reach of a shower enclosure.