Brillia 2m 3-Phase Track Lighting Rail - Black 1-10V Dimmable

The Brillia is a 2m surface-mounted track lighting rail designed for 3-phase electrical systems, finished in matt black aluminium with a 35mm low-profile projection from the ceiling. The track accepts 3-phase track heads (sold separately) that clip into the internal conductor channels, allowing spotlights and pendant adaptors to be positioned and repositioned anywhere along the 2m run without re-wiring.

Designed for retail displays, gallery walls, home kitchens and office task areas, the 3-phase system allows three separate circuits to run through the same track. Each circuit can be controlled independently, so one track can deliver three different lighting zones or three different dimming levels depending on how the track heads are assigned. The 1-10V dimming protocol is compatible with most commercial and residential dimming systems that support low-voltage control signalling.

The aluminium body measures 2000mm long by 35mm deep, giving a discrete ceiling-level presence that does not dominate sightlines in rooms with standard 2.4m ceiling heights. The matt black finish absorbs light rather than reflecting it, keeping attention on the illuminated surfaces rather than the track itself. The IP20 rating suits dry indoor environments including living rooms, bedrooms, offices and commercial interiors, but excludes bathrooms and outdoor applications.

What's the difference between 3-phase and single-phase track?

A 3-phase track carries three separate electrical circuits within the same rail, allowing you to control three groups of track heads independently. Single-phase track carries one circuit, so all heads switch and dim together. The Brillia 3-phase track is useful when you want different zones or dimming levels on the same rail.

Does the track come with lights?

No. The Brillia track is sold as a rail only. You need to purchase compatible 3-phase track heads separately. Search for '3-phase track heads' or 'track spotlights' at Niori to find compatible fittings.

Can it be cut to a shorter length?

Yes. The aluminium track can be cut with a hacksaw to fit shorter runs, though cutting voids the warranty. Live conductors run the full internal length of the track, so both ends must be capped with end caps (included) after cutting to maintain electrical safety.

What does 1-10V dimming mean?

1-10V is a low-voltage dimming control protocol where a separate control wire carries a 1-10V signal to the dimming driver. It requires a compatible 1-10V dimmer and track heads with 1-10V drivers. It is commonly used in commercial installations and some residential systems.