Bowtie 2 Light Wall Light IP44 - Matte Black

The Bowtie is a 2-light bathroom wall light with a matte black steel frame holding two tapered opal glass shades on either side of a circular backplate. Each shade houses a 3W G9 LED bulb (included), with a 3000K colour temperature that casts warm white light through the frosted glass. The IP44 rating allows installation in bathroom zones 2 and 3, including above-mirror positions and general wall locations where moisture is present.

Designed for bathroom mirror lighting and vanity areas, the Bowtie mounts horizontally above a mirror or vertically on flanking walls where paired symmetrically. The 337mm width suits single and double basin mirrors, with the dual light sources reducing facial shadows during grooming and makeup application. The opal glass diffuses the LED output evenly, avoiding hard glare or hotspots in reflective surfaces. The 102mm projection from the wall clears most mirror frames without obstruction.

The matte black powder-coated steel finish resists bathroom humidity and provides a defined geometric profile that pairs with contemporary basin taps, shower fittings and black-framed mirrors. The bowtie silhouette—two opposing trapezoid shades connected by a horizontal bar—creates symmetry without requiring traditional sconce styling. The fixture forms part of a small Elstead Lighting collection that includes matching flush ceiling and wall fittings, allowing coordinated bathroom lighting schemes across multiple fixtures.

What IP rating does the Bowtie carry and where can it be installed in a bathroom?

The Bowtie carries an IP44 rating, meaning it is protected against splashing water from any direction. This allows installation in bathroom zones 2 and 3, which includes positions above mirrors, on general bathroom walls, and in en-suites away from direct shower spray. It cannot be installed within the shower enclosure itself (zones 0 and 1).

Are the LED bulbs replaceable?

Yes. The fixture uses two G9 LED bulbs rated at 3W each, which are included. When replacement is needed, any standard G9 LED bulb up to 3W will fit. The 3000K colour temperature included gives warm white light suitable for bathroom use.

Can it be mounted vertically instead of horizontally?

The Bowtie is designed to be mounted horizontally above a mirror. Vertical mounting is possible but the symmetry of the design works best in the horizontal orientation, and most bathroom mirrors benefit from horizontal light sources to reduce facial shadows.

What mirror width does it suit?

The 337mm width works above single basin mirrors (typically 500-700mm wide) and smaller double basin mirrors (up to 1000mm). For larger mirrors, consider pairing two Bowtie fittings symmetrically or choosing a longer fixture from the same Elstead collection.