Description
A compact directional spot on a round wall plate, with a rounded head that swivels the light where you want it. The LED is built in and gives a warm 3000K light drawn from just 3W, narrow enough to land on a page or a picture rather than spilling across the whole wall. A toggle switch sits on the fitting itself, so it can be turned on and off by hand without a nearby wall switch, and the finish is matt black throughout, head and base alike.
This is the sort of light we suggest for a bedside, mounted at headboard height so each side of the bed can be worked independently while the other sleeps. It reads equally well flanking a mirror, over a reading chair, or in a narrow hall or landing where the plate stands only 74mm across and the head barely leaves the wall. The output is fixed rather than dimmable, so it suits places where you want a reliable pool of light instead of a mood setting. We would put a pair up in a guest room and skip the table lamps altogether.
The body is slim and upright, tall enough to reach comfortably yet quiet on a plain wall, and the matt finish keeps glare off the metalwork. It carries a three year warranty. Being an integral LED there is no lamp to fit or replace; if the head loses its crispness, switch off at the mains, wait for it to cool and take a barely damp cloth to the front, drying it straight after. Keep it to dry rooms indoors, away from bathroom splashes. Elsewhere in the range we stock the same body in matt white, a square-headed version of this spot, and a ring head if you would rather have a soft halo than a beam.
Specification
| Colour |
Matt Black |
| Wall Mountable |
Yes |
| Weight |
0.23KG |
| Width |
74mm |
| Height |
440mm |
| Projection |
29mm |
| Materials Used |
Aluminium, Acrylic, Iron |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 3W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| No. of Switching Cycles |
30000 |
| Average Life of LED (hrs) |
25000hrs |
| LED Brand |
Bridgelux |
| SMD Chipset |
BXCD4545 |
| LED Power (W) |
3W (±5%) |
| Type of LED |
COB |
| Lumens Per Watt (lm/W) |
62lm/W (±5%) |
| Beam Angle (°) |
30° |
| System Flux (lm) |
185lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption (W) |
3W (±5%) |
| Input Voltage (V) |
100-240V~50/60Hz |
| Switch |
Yes - Toggle Switch |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life (hrs) |
25000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How bright is it, and what colour is the light?
It is a 3W integral LED at 3000K, a warm white close to the tone of a traditional filament lamp. The beam is narrow and directional, so it is a task light rather than a way to light a whole room.
Do I need a switch on the wall?
No. A toggle switch is built into the fitting, so it can be operated at the light itself. It can also be run from an existing switched circuit if you have one.
Can it be dimmed?
No, it is non-dimmable. Fitting it to a dimmer circuit is not advised.
What size is it?
The plate measures 74mm wide, the fitting stands 440mm tall and it projects 29mm from the wall. It weighs 0.23kg.
Is there a lamp to replace later on?
No. The LED and its driver are integrated, with a rated life of 25,000 hours, so there is nothing to change during normal use.
Is it suitable for a bathroom?
It is rated IP20, so it should be kept to dry indoor rooms rather than bathroom zones or anywhere exposed to moisture.