Description
Sitting close to the ceiling with only a shallow drop beneath it, this is a three lamp fitting in polished chrome, 25cm across. Every E27 holder is made to take a shade of your choosing, so the finished look is yours to set: small drums for something quiet, or glass if you want a little sparkle. The fitting itself is plain enough that the shades do the talking. We think of it as a base to build on rather than a finished piece. The shade and the lamp are not included: the photographs show our Sigma Lamp Shade 40cm, one of the lamp shades we sell separately.
It earns its keep in hallways, landings, bedrooms and kitchens where the ceiling sits low and a hanging pendant would be in the way. The lamps spread light across a room rather than pooling it in the middle, which suits a landing or a square bedroom. Each holder takes up to 20W, so LED lamps will run it comfortably, and the light can be dimmed where the lamps and dimmer switch are chosen to match. It is a fitting for dry rooms indoors, and we would not hang it in a shower room. We would suggest it where the shades are already chosen and something is needed to hold them.
The polished chrome is bright and mirror like, so it does pick up fingerprints while you are handling it. A dry microfibre cloth brings the shine back, and we would keep cream cleaners and scouring pads well away. It carries a one year warranty. The same fitting appears elsewhere in the range as a smaller semi flush, offered in antique brass, satin nickel and satin black as well as chrome. There are linear pendants in those same finishes too, if you need light along a table.
Specification
| Colour |
Polished Chrome |
| Ceiling Mountable |
Yes |
| Weight |
0.79KG |
| Diameter |
250mm |
| Height |
330mm |
| Materials Used |
Iron |
| Adjustable Height |
No |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
3 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Included |
No |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much room does it need below the ceiling?
The fitting measures 250mm in diameter and 330mm in overall height, before any shades are added, so allow for the depth of the shades you pick on top of that.
Which lamps should I use?
It holds three E27 lamps, each rated to a maximum of 20W. LED GLS A60 lamps are the sensible choice and are what we would fit. Lamps are not supplied.
Can I dim it?
Yes, provided the lamps you fit are marked dimmable and the dimmer switch is compatible with them.
Are shades included?
The shade is not supplied - pick one from our lamp shades. No. The holders are made to accept a wide selection of shades, so you choose those to suit the room.
How should I clean the chrome?
Wipe it with a dry microfibre cloth to lift dust and fingerprints. For anything stickier, a barely damp cloth followed by a dry one is enough. Avoid abrasive pads and cream cleaners, which will dull the polish.
Is it suitable for a bathroom?
No. It is rated IP20 and belongs in dry indoor rooms such as bedrooms, hallways and living rooms.