Description
Three E27 lampholders drop from a single round ceiling fitting that measures 25cm across, each on its own flex so the heights can sit level or step down in sequence. It is a universal pendant, which means the lampholders are bare and ready for shades of your choosing, from small drums to glass and rattan. The antique brass has a warm, slightly softened tone that sits well with older woodwork and darker paint, and it reads just as happily against a plain white ceiling. The shade and the lamp are not included: the photographs show our Sigma Lamp Shade 40cm, one of the lamp shades we sell separately.
We reach for a fitting like this over a dining table or a kitchen island, where shades in a line or a loose cluster give more light and more interest than a single pendant can. The drop adjusts across a wide range, so it suits a tall hallway as readily as a room with an ordinary ceiling height. It takes a GLS shaped lamp in each holder, and we would fit LED versions in a warm white for a softer glow across the table. With suitable lamps and a compatible dimmer, the light can be brought down for the evening.
Suited to dry indoor rooms and a normal household circuit, it is a quiet piece of hardware meant to be dressed rather than admired on its own. Care asks little: a dry duster over the brass every so often, and no polishes or sprays, which will dull the finish in time. It carries a one year warranty. The wider range puts the same universal lampholders on other shapes, including flush ceiling fixtures, linear pendants and small semi flush fittings, and we stock those in polished chrome, satin nickel and white alongside this antique brass.
Specification
| Colour |
Antique Brass |
| Ceiling Mountable |
Yes |
| Weight |
0.96KG |
| Diameter |
250mm |
| Minimum Drop |
340mm |
| Maximum Drop |
3000mm |
| Materials Used |
Iron |
| Adjustable Height |
Yes |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
3 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Included |
No |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How far down does it hang?
The drop can be set anywhere from 340mm to 3000mm, so it can hang close under a low ceiling or reach well down into a stairwell or over an island.
What lamps should I use?
Each of the three holders takes an E27 lamp, with LED GLS A60 recommended, up to 20W per lamp. Lamps are not supplied.
Can I dim it?
Yes, provided you use dimmable lamps together with a dimmer switch that is compatible with them.
Will my existing shades fit?
The shade is not supplied - pick one from our lamp shades. The lampholders are the standard universal type, so most shades made for an E27 fitting will sit on them, including small drums, glass and woven styles.
How wide is the ceiling fitting?
It measures 250mm in diameter, and the fitting weighs 0.96kg before shades and lamps are added.
Is it suitable for a bathroom?
No. It is rated IP20, which makes it a fitting for dry rooms such as kitchens, dining rooms, hallways and bedrooms.