Description
The Baselle is a set of three round recessed downlights in white, each with a steel body and a frosted lens set inside a slim white ring. Each light measures 7.8cm in diameter, so the visible trim stays small and neat against the ceiling. They take a GU10 lamp, and each light is rated at 2.8W and 250lm. The IP20 rating settles where they belong: indoors, in dry rooms, away from splashing water. They run on 220-240V mains and are switched at the wall, with no switch of their own.
Because they come as a set of three, they suit a run of lights along a hallway or landing, or an even spread across a living room, bedroom or study. Recessed lights keep the ceiling clear, which helps a low or small room feel more open, and the white trim blends into a white ceiling rather than drawing the eye. For anyone replacing old downlights or planning a new layout, a matched set means all three lights look the same across the ceiling.
Each light needs a 6.5cm hole cut in the ceiling and 11.5cm of clear depth above it, so it is worth checking the space before you buy. Two spring clips grip the ceiling board to hold each light in place, and a thin wire clip holds the frosted lens in its ring. As a wired-in mains fitting, the set is installed by a qualified electrician. The packed weight is 0.66KG, and the installation instructions come as a download, so you can check the details before the work begins.
Specification
| Diameter |
7.8cm |
| Body Material |
Steel |
| Body Colour |
White |
| Light Source |
GU10 (bulb included) |
| Wattage |
3 x 2.8W |
| Lumens |
250lm per light (3 lights) |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Energy Class |
F |
| Recess Depth |
11.5cm |
| Cut-Out |
6.5cm |
| Weight (packed) |
0.66KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can these downlights go in a bathroom?
No. With an IP20 rating these downlights are made for dry indoor rooms, so we would keep them away from bathrooms and anywhere water can splash.
What size hole does each downlight need?
Each light needs a 6.5cm hole cut in the ceiling and 11.5cm of clear depth above the ceiling, while the visible trim measures 7.8cm in diameter.
Which lamp does each light take?
Each light takes a GU10 lamp and is rated at 2.8W, giving 250lm per light, and the set has three lights in total.
Do the downlights have their own switch?
No, they have no switch of their own. They are switched at the wall, so a wall switch controls them.
What material is the body?
The body is steel in a white finish, with a frosted lens and two spring clips that hold each light firmly in the ceiling.