Description
A small fabric wall light, with a white faux silk shade set above champagne gold metalwork. The shade measures 12cm across, so the fitting stays tight to the wall and reads as a neat upright shape rather than a broad one. A rocker switch is built in, which means the light is worked at the fitting itself rather than from a switch across the room. It takes an E14 lamp, and we would put a candle shaped LED in it, warm white for a gentler wash.
Wall lights this size earn their keep beside a bed, where the switch on the fitting saves reaching for anything else, and a pair either side of a headboard gives each person their own reading light. It also suits a hallway, a landing, or the shallow wall next to a chimney breast, and it is one we suggest where a table lamp would only crowd the surface. Dimming is possible if you fit dimmable lamps, handy in a bedroom when you want the level down late on.
The shade is faux silk over a laminate lining, white inside and out, and the light it throws is soft and easy on the eye. The champagne gold is warm rather than brassy, so it settles in beside cream, oatmeal and pale timber without fighting them. Dust the fabric with a soft brush, working gently around the seams, and give the metal a dry cloth only, keeping sprays and polishes well clear of both. Keep it to indoor rooms, away from damp and splashes. Lamps up to 20W can be used, and it carries a one year warranty. Lamps are not included.
Specification
| Colour |
Champagne Gold |
| Second Colour |
White |
| Weight |
0.56KG |
| Width |
120mm |
| Height |
355mm |
| Projection |
180mm |
| Materials Used |
Terylene with Cotton Fabric, PVC Lining, Iron |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x E14 20W max (lamps not included) |
| Lamp Cap |
E14 |
| Recommended Lamp |
LED (Candle C35) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Yes - Rocker Switch |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
White/White Laminate |
| Base Dimensions (mm) |
D:90mm, H:25mm |
| Bracket Dimensions (mm) |
L:75mm, W:20mm, T:1.5mm |
| Shade Material |
Terylene with Cotton, PVC, Metal Frame |
| Shade Shape |
Cylinder |
| Shade Included |
Yes |
| Number of Shades |
1 |
| Base Material |
Iron |
| Pieces Included |
1 |
| Unassembled |
Yes-Shade To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamp should I fit?
An E14 candle lamp, ideally a C35 shaped LED, up to 20W. We would choose a warm white for bedrooms and hallways.
Can I dim it?
Yes, provided you fit dimmable lamps and pair them with a compatible dimmer. Neither a dimmable lamp nor a dimmer is supplied with the light.
How far does it stand off the wall?
The projection is 180mm, with an overall height of 355mm and a shade 120mm wide, so it suits narrower walls and tighter corridors.
Is there a switch on the light itself?
There is, a rocker switch on the fitting, so it can be turned on and off at the light rather than at a wall switch.
How do I clean the fabric shade?
Switch the light off and let it cool, then lift dust with a soft brush or the low setting on a vacuum. Avoid water and cleaning fluids on the faux silk.
Can it go in a bathroom?
No. It is rated IP20 for dry indoor rooms only, so it should not be used in a bathroom zone or outdoors.