Description
A compact switched wall light in antique brass, dressed with a black faux silk shade of 12cm. The finish has the warm, slightly dulled tone of aged brass rather than a bright polish, and the shade is lined in white so the light bounces forward rather than being swallowed by the dark fabric. A rocker switch sits on the body, which means it can be turned on and off at the fitting without reaching for the wall switch. It takes an E14 candle lamp, and will dim if you pair it with a dimmable lamp.
We think of this as a bedside light first: low output, a soft pool of light, and a switch under your hand when you want to stop reading. It suits a narrow hallway too, or the wall beside a favourite chair, where a floor lamp would crowd the space. Wired for indoor rooms only, it is happiest away from splashes and steam, so a bathroom is not its place. We would fit an LED candle lamp of a warm colour and keep it well within the 20W ceiling.
The shade is a laminate-backed faux silk on a black ground with white inside, and the metalwork carries the antique brass through the backplate, stem and lamp holder. Keep it simple in use: lift dust from the fabric with a soft brush rather than a damp cloth, and give the brass an occasional buff so the highlights stay lively. It carries a one year warranty. Two of these either side of a bed read neatly, and the black shade holds its own against a papered or deep-coloured wall. Lamps are not included.
Specification
| Colour |
Antique Brass |
| Second Colour |
Black |
| Weight |
0.62KG |
| Width |
120mm |
| Height |
355mm |
| Projection |
180mm |
| Materials Used |
Terylene with Cotton Fabric, PVC Lining, Iron |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x E14 20W max (lamps not included) |
| Lamp Cap |
E14 |
| Recommended Lamp |
LED (Candle C35) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Switch |
Yes - Rocker Switch |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Black/White Laminate |
| Base Dimensions |
D:90mm, H:25mm |
| Bracket Dimensions |
L:75mm, W:20mm, T:1.5mm |
| Shade Material |
Terylene with Cotton, PVC, Metal Frame |
| Shade Shape |
Cylinder |
| Shade Included |
Yes |
| Number of Shades |
1 |
| Pieces Included |
1 |
| Unassembled |
Yes-Shade To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size is the shade?
The shade measures 12cm across, and the fitting stands 355mm tall overall with a projection of 180mm from the wall.
Which lamp does it take, and what is the maximum?
An E14 candle lamp, ideally an LED C35 candle, up to a maximum of 20W. No lamp is supplied with the light.
Can it be dimmed?
Yes, provided you fit a dimmable lamp and use it with a compatible dimmer. Neither the lamp nor a dimmer is included.
Does it have its own switch?
It does. A rocker switch on the fitting lets you control this light on its own, independently of the room circuit switch.
How should I clean the shade and the brass?
Brush the faux silk lightly with a soft dry brush to lift dust, and wipe the antique brass with a dry cloth only. Avoid sprays, solvents and damp cloths on the fabric.
Is it suitable for a bathroom?
No. It is rated IP20 for dry indoor rooms, so keep it to bedrooms, hallways and living spaces.