Description
A small switched wall light with the lamp left on show, finished in antique brass with a warm, slightly aged tone rather than a bright polish. The backplate measures 11cm across, and the short arm holds the lampholder close by, so the whole thing keeps to a shallow footprint. Switching is done on the fitting itself, by a rocker that clicks under the thumb. It takes an E14 candle lamp of up to 20W, and we would put a clear LED candle in it, since the lamp is on view and a good filament shape earns its keep here. Candle shades are optional and sold separately: see our lamp shades.
We reach for this one where a plug-in table lamp would only clutter a surface: beside a bed, along a hallway, either side of a mirror, or in a shallow recess where a shaded fitting would sit too proud. Having the switch on the body means you can work it from where you are sitting rather than crossing the room for the main switch. It suits anyone who likes the lamp itself to be part of the look, and it reads well in pairs, one each side of a headboard or a chimney breast.
The metalwork wears its antique brass finish quietly and needs very little of you: turn the power off, let things cool, then run a soft dry cloth over the arm and backplate, keeping polishes and damp cloths away from the finish. It is wired as an earthed fitting and belongs in dry rooms indoors, so bedrooms, landings and living rooms rather than shower rooms or an open porch. Dimming is possible provided the lamp you fit is a dimmable one. It carries a one year warranty. Lamps are not included, so pick the candle to match the mood of the room.
Specification
| Colour |
Antique Brass |
| Ceiling Mountable |
Yes |
| Weight |
0.26KG |
| Width |
110mm |
| Height |
180mm |
| Projection |
150mm |
| Materials Used |
Iron |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x E14 20W max (lamps not included) |
| Lamp Cap |
E14 |
| Recommended Lamp |
LED (Candle C35) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Switch |
Yes - Rocker Switch |
| Dimmable |
Yes - Dimmable Lamps Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Included |
No |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Does it come with a shade?
No. The shade is not included; choose one from our lamp shades.
Which lamp should I fit?
An E14 candle lamp, C35 shape, rated no higher than 20W. We would choose an LED candle, as the lamp is visible in use. Lamps are not supplied.
Can I dim it?
Yes, as long as you fit a dimmable lamp and pair it with a compatible dimmer on the circuit.
How far does it stand off the wall?
Projection is 150mm, with a height of 180mm and a width of 110mm, so it stays clear of most walkways and bedside space.
Is it suitable for a bathroom?
No. It is rated IP20 and intended for dry indoor rooms only.
How do I keep the finish looking right?
Switch off at the wall, allow the lamp to cool, then dust with a soft dry cloth. Avoid metal polish, solvents and anything abrasive, as these will lift the aged tone.
Is there a switch on the fitting?
Yes, a rocker switch, so it can be turned on and off at the light itself.